Personal Video Recorder Digital Satellite Receiver
MENU OPERATION 18
Personal Video Recorder Digital Satellite Receiver
MENU OPERATION17
from the transponder list, you can add it by inputting appropriate parameter values for a
new transponder using the ( ) key. When you want to change the parameter of an
existent transponder, select the parameter using the ( ) key, change its value and press
the Exit key. Correctly set various parameters.
3.D. PARENTAL CONTROL
This function prevents children or unauthorized persons from watching programs.
Also you can change PIN (Personal Identification Number) code. Select Parental Control
menu in Installation menu, and the
following screen will be displayed.
3.D.1. Receiver Lock
To lock receiver, select Receiver Lock in
the Parental Control menu and change it
to On mode using the left/right keys
(
)
3.D.2. Menu Lock
Select the maturity with left/right keys
(
)
3.D.3. Maturity Rate
To lock the Main Menu, select Menu Lock in the Parental Control menu and change it to
On mode using the left/right keys (
)
3.D.4. Change PIN Code
You can change your PIN code from
factory default value 0000 as follows:
Select Change PIN Code in the
Parental Control menu using the
up/down keys (
).
Press OK key. Then you will be asked
for a new PIN code.
Once you enter a new PIN code,
the receiver will ask you to enter it in again.
After you enter a new PIN code twice, the PIN code is changed permanently.
If you forget the PIN code, you have to contact the distributor to find out it.
3.E. RECEIVER UPGRADE
You can upgrade the software of this receiver through serial port when the new software is
released.
Please contact the distributor for receiver upgrade.
Distributor supports you useful
information and new software for the
receiver.
3.F. TIME SETTING
You can adjust date and time in time
Setting menu. And, you can switch on/off
the STB using this menu.
Mode
Time adjust
Current date
Current time
On time
Off time
Information
Timeout
: Select manual or auto . In auto mode, the receiver is using the time code
from satellite signal.
: Difference between Greenwich time and local time (CET 1:00, summer-
time 2:00)
: The current date is indicated (manual mode only)
: The current time is indicated (manual mode only)
: To enter STB Turn — on time.
: To enter STB Turn — off time.
: To choose how long informations are shown on the screen