567248
47
Zoom out
Zoom in
Previous page
1/330
Next page
42 Keys, doors, windows, sunroof
4. Press the button on the manual remote
control unit while pressing and holding
the desired button of the universal
re mote contro l.
5. The control indicator in the mirror
housing will flash slowly at first. As soon
as it flashes rapidly, release both
buttons. The universal remote control
system is now programmed for the
chosen system.
6. To programme other buttons with other
systems, repeat steps 3 to 5.
If a system cannot be operated after
rep eated programming, and the control
indicator flashes rapidly for a short time
after the relevant button has been pressed
and then illuminates for 2 seconds, the
receiver may be equipped with a variable
code syste m - see ne xt column.
Prog ramming the universal remote
control system for variable code systems
1. Perform b asic prog ramming –
see previous page.
2. Activate synchronisation mode of
system (see system manufacturers
operating manual) and briefly press the
pre-programmed button on the
universal remote control three times
within 30 seconds.
3. The universal remote control system is
now programmed for variable code
systems. To programme other systems
for variable codes, repeat steps 1 and 2
for the other buttons on the universal
remote control.
Using t he universal remote control system
With the ignition on, press the required
universal remote control button and the
control indicator in the mirror housing will
illuminate. The pre-programm ed system
can now be operated using the universal
remote control system.
Reprog ramming individual button
settings
If a button that has already been
programm ed is to b e used for a diffe rent
system, repeat steps 3 to 5 of the basic
programm ing procedure described
previously.
Clea ring all programmed button settings
Before selling the vehicle, it is a good id ea
to erase button settings.
Button settings can only be erased all at
once. It is not possible to erase individual
button settings. Buttons can, however, be
individually reprogrammed - see
"Reprogramming individual button
settings".
In order to erase the programming of all
3 buttons, press both outer buttons and
release as soon as the LED begins to flash
(after approx. 20 seconds). All button
settings have now been clea red and can
be programmed anew at any time.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Opel VAUXHALL Vectra 2007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Opel VAUXHALL Vectra 2007 in the language / languages: English as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info