Manual Oozoo Models Q00400 - Q00407 (page 8 of 9) (English)

815004

Zoom out

Zoom in

1/9

OOZOO Smartwatches

Q4 Series Manual

Specifications

Required phone operating system

Android 4.4 or above

iOS 9.0 or above

Required Bluetooth version

5.0 or above

Display screen 1.09 inch IPS HD screen (240x240 PX)

Full touch screen

Battery 150mAh

Up to 5 days (depending on use)

Waterproof IP67 (dust-tight and splash proof)

Note: IP67 means that the watch is dust-tight and splash proof. The waterproof performance of this

product is not permanently effective and may decrease over time. It supports short-term use such as

washing hands, light rain, etc., but does not support scenarios such as bathing, showering, swimming,

diving, surfing, etc. The watch is not waterproof to seawater, acidic and alkaline liquids, solutions,

chemical reagents and other aggressive liquids. If the watch is in contact with one of its aggressive

liquids, immediately clean the watch with clean water, use a soft cloth to clean and dry the device

carefully. Damage caused when used incorrectly is not covered by warranty.

Instructions

1. Wearing method:

It is recommended to wear the watch comfortably tight enough around the wrist and

make sure the watch stays in contact with your skin. Try to avoid wearing it too tight

or too loose for the most accurate sports and health measurements.

2. Power ON/OFF Switch:

Long press ON/OFF Switch button for 3 seconds to turn on/off.

Short press this button to turn on the screen / turn off the screen / quickly return to

the main interface

3. Heart rate monitor light:

The heart rate monitor light flickers while measuring. Please don't test the heart

rate monitor against an object.

4. Charging method:

Please charge the watch to fully charged when using it for the first time (charging

time takes 1.5 - 2 hours). Make sure the charging spots on the back of the watch

are making contact with the charger contacts. When charging the watch make sure

the adapter/ power supply delivers a maximum of 5 volts and does not use fast

charging technology. It is recommended to use a universal charger with certification

marks.

Connecting your smartwatch with your mobile phone

1. Download the DaFit application for your mobile phone in the app store or use your

mobile phone to scan the QR code in the picture below.

2. Confirm that the Bluetooth of your mobile phone is turned on, do not directly link

the watch in the Bluetooth setting of the mobile phone. You need to connect with the

watch in the DaFit app.

(For Android users: you need to turn on the DaFit app location permission and enable the

phone system location function).

3. Go to the DaFit app and do the following:

Add a device > select ‘Q4’ > choose ‘Pair’

(Select "Pairing" and "Allow" in the pop-up request permission information window when

connecting to give the DaFit app permission, otherwise it will affect the watch functioning.)

4. You are connected:

The date, time and language of your mobile phone will now automatically

synchronize with the smartwatch.

Main Features

Changing dials

Long press on the main interface for 3 seconds. The watch will vibrate and the dial

shrinks. Swipe left or right to choose from four original OOZOO dials. Tap to select.

If you would like more dial styles or want to create your own, please go to "Watch

faces" in the DaFit app.

Control Center

Swipe from top to bottom on the main interface to enter the control center. Here you

can turn on/off vibration, theater mode (power saving mode), adjust screen

brightness, see weather forecast, Bluetooth connection status and the battery level of

the watch. You can also find the settings of the watch here.

Settings

Tap the gear icon in the control center interface. Here you can quickly set the

functions, such as vibration, brightness, restore factory settings and shutdown. Also

you will find more info under ‘about’.

Message center

Swipe from bottom to top on the main interface to enter the messages interface. Here

you can quickly browse your messages (displays the latest 5 messages).

Main menu

Swipe from left to right on the main interface to enter the cellular function interface

(main menu). Drag the cellular icon to quickly enter the corresponding function.

Alarm clock

Select the alarm clock in the cellular function interface to turn off/on three alarm

clocks. You can set the alarm times in the DaFit app.

Stopwatch

Select the stopwatch in the cellular function interface. Tap play to start or arrow to

reset. Swipe from left to right to exit.

Countdown

Select countdown in the cellular function interface of the watch. There are 8 time

periods available, ranging from 1 minute to 2 hours. Tap to enter or swipe from left to

right to exit.

Swipe through the functions

Pedometer

Swipe to the next screen main interface to enter the pedometer interface, which

displays the current number of steps, distance and burnt calories.

Note: The pedometer uses the three-axis gravity sensor combined with an algorithm to count

your steps. As the watch is worn on the wrist and exposed to daily movements (such as

raising your hand) the results can differ from other pedometers for example from your phone.

Sleep monitor

Swipe to the next screen to enter the sleep monitoring interface. This interface can

view the last sleep status.

Note: The sleep monitoring period is from 8 pm to 10 am. For monitoring your sleep, make

sure to wear the watch while sleeping. The results are based on movements and existing

data science. Check your sleep monitor data after the amount of more than 100 steps in the

next morning, so the sleep monitor recognizes that you are awake. You can upload the sleep

monitor data to the DaFit app to form a health report. If the physical activity is too high during

sleep the watch may recognize this as a non-sleep state.

Heart rate measurement

Swipe to the next screen to enter the heart rate measurement interface. When the

icon "- -" is beating, it means the measurement is being performed. Please hold still

and wait for about 15-30 seconds. When the monitor is no longer beating, the watch

will vibrate and display the current heart rate.

Note: The measurement is based on the heart rate sensor on the back of the watch and

existing data science to get measurements. The results of a heart rate measurement are for

reference only and cannot be used as the basis of medical related aspects.

Exercise mode

Swipe to the next screen to enter the exercise mode. This interface displays the

latest exercise data. Tap to enter multiple sports options, such as walking, running,

cycling, basketball, football, badminton, skipping rope and yoga. After you tap to

enter the corresponding exercise mode, it will count down. If you want to pause or

end the exercise, swipe to the left, tap pause or stop and tap confirm. The data will

be saved.

Blood pressure measurement

Swipe to the next screen to enter blood pressure measurement interface. When the

icon "- -" is beating, it means the measurement is being performed. Please hold still

for about 15-30 seconds. When the monitor is no longer beating, the watch will

vibrate and display the current blood pressure.

Note: The measurement is based on the heart rate light on the back of the watch and

existing data science to get measurements. The results of a heart rate measurement are for

reference only and cannot be used as the basis of medical related aspects.

Breathing training

Swipe to the next screen to enter the breathing training. Tap to start. The icon will

dynamically zoom in (inhale) and out (exhale).

Weather forecast

Swipe to the next screen to enter the weather forecast. Here you can check your

local weather information.

Note: For this function you need to make sure that the weather forecast permission button is

switched on in the DaFit app.

Remote control photography

Swipe to the next screen to enter remote control photography interface. Open the

DaFit app and tap the watch remote control button. The DaFit app pops up the

camera function. Tap the watch button to take a picture.

Music control

Swipe to the next screen to enter the music control interface. In this interface you can

control your music with the icons play, pause, forward/backward.

Note: For this function you need to make sure that the mobile music app you are using is

active before you can use the control.

DaFit app setting guide:

Watch faces

On this function page you can switch the watch dial style, create your own or

download more free dials.

Notifications

You will need to give permission for each message/call app in the DaFit app in order

to receive notifications on your smartwatch. Go to the middle page in the DaFit app >

Notifications. Switch on/off for each app you want to receive notifications from.

Alarm

Go to the middle page in the DaFit app > Alarms. Here you can set 3 alarm times.

Shutter

Click to turn on the remote camera function

Others

Here you can set the following; all-day heart rate monitor, language, screen on time,

reset, quick view, sedentary/water reminder, weather, women's menstrual cycle

settings.

Upgrade

When the watch has a new version update, this function can update the watch

software.

Note: When updating the software, please keep the watch with sufficient power and keep

close to the phone during the update process

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oozoo Models Q00400 - Q00407 in the language / languages: English as an attachment in your email.

The manual is 0.4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oozoo Models Q00400 - Q00407

Oozoo Models Q00400 - Q00407 User Manual - German - 8 pages

Oozoo Models Q00400 - Q00407 User Manual - Dutch - 9 pages

Oozoo Models Q00400 - Q00407 User Manual - French - 9 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oozoo Models Q00400 - Q00407 Manual

Product: