682000
7
Zoom out
Zoom in
Previous page
1/40
Next page
7
You can take a picture of your baby or upload a picture from your
phone, or add a picture later. Add the baby’s name and other
information, and click “Save. You can come back to this page at
any time from the ”My Babies” list.
SETTING UP THE MONITOR
Make sure you have your phone connected to a 2.4GHz WiFi
network before plugging in Twinkle.
Once plugged in, the signal light will start a sequence. When the
signal light is flashing green, go back to the app in your phone.
(Log in if needed.)
Press the MONITOR” tab and Select “Set up Twinkle”.
Scan the QR code from the device using Onni Baby app.
If you want, you can edit the monitor name (for example: Baby’s
room). Select “Save to proceed.
Enter your WLAN password. The default WLAN is the one
you have active on your phone. If you want to use another
available WLAN network, first connect your phone to that
network and then switch on the monitor, after it’s ready for new
WLAN setup, you will see flashing green signal light. Then go to
“Monitor” tab in your app and click settings” link. That will open
the WLAN setup view to add WLAN password.
Click “Save, and your new Twinkle will be connected to the baby
profile you’ve just created. Once Twinkle’s signal light turns flat
green, you can start monitoring.
NOTE: We recommend using WPA security types. WEP
security type doesn’t work with all routers, and if the SSID
names contains spaces (example: home router), the connection
can fail. If your router is set for enabling MAC addresses or auto
channel selection, you may experience some diculty in setting
up Twinkle. If that’s the case, disable MAC address filtering and
try selecting 2.4 GHz band on your router and assign a fixed
channel (11).
ENG
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onnicare Twinkle at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onnicare Twinkle in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info