469196
88
Zoom out
Zoom in
Previous page
1/92
Next page
88
Troubleshooting—Continued
The surround back speakers produce no sound
The surround back speakers are not used with all listen-
ing modes. Select another listening mode (page 63).
Not much sound may be produced by the surround
back speakers with some sources.
Make sure the speakers are congured correctly
(page 67).
The subwoofer produces no sound
When you play source material that contains no infor-
mation in the LFE channel, the subwoofer produces
no sound.
Make sure the speakers are congured correctly
(page 67).
Theres no sound with a certain signal format
Check the digital audio output setting on the con-
nected device. On some game consoles, such as those
that support DVD, the default setting is off.
With some DVD-Video discs, you need to select an
audio output format from a menu.
Depending on the input signal, some listening modes
cannot be selected (page 62).
Cant select the DTS-ES Discrete/Matrix listen-
ing modes
These modes cannot be selected when no surround
back speakers are connected, or the Zone 2 speakers
are being used.
You can not always select all of the listening modes,
depending on the number of the speaker connected
(page 62).
Cant get 6.1/7.1 playback
If no surround back speakers are connected, or the
Zone 2 speakers are being used, 6.1/7.1 playback is
not possible.
You can not always select all of the listening modes,
depending on the number of the speakers connected
(page 62).
The volume cannot be set to 99
When the levels of all speakers have been calibrated
(page 70), the maximum volume setting may change.
Noise can be heard
Using cable ties to bundle audio cables with power
cords, speaker cables, and so on may degrade the
audio performance, so dont do it.
An audio cable may be picking up interference. Try
repositioning your cables.
The Late Night function doesnt work
Make sure the source material is Dolby Digital
(page 66).
The DVD analog multichannel input doesnt
work
Check the DVD analog multichannel input connec-
tions (page 26).
To select the DVD analog multichannel input, press
the [MULTI CH] input selector button.
Check the audio output settings on your DVD player.
About DTS signals
When DTS program material ends and the DTS bit-
stream stops, the AV receiver remains in DTS listen-
ing mode and the DTS indicator remains on. This is to
prevent noise when you use the pause, fast forward, or
fast reverse function on your player. If you switch
your player from DTS to PCM, because the AV
receiver does not switch formats immediately, you
may not hear any sound, in which case you should
stop your player for about three seconds, and then
resume playback.
With some CD and LD players, you wont be able to
playback DTS material properly even though your
player is connected to a digital input on the AV
receiver. This is usually because the DTS bitstream
has been processed (e.g., output level, sampling rate,
or frequency response changed) and the AV receiver
doesnt recognize it as a genuine DTS signal. In such
cases, you may hear noise.
When playing DTS program material, using the pause,
fast forward, or fast reverse function on your player
may produce a short audible noise. This is not a mal-
function.
The beginning of audio received by an HDMI IN
cant be heard
Since it takes longer to identify the format of an
HDMI signal than it does for other digital audio sig-
nals, audio output may not start immediately.
Theres no picture
Make sure that all video connecting plugs are pushed
in all the way (page 18).
Make sure that each video component is properly con-
nected.
If your video component is connected to a component
video input, your TV must be connected to the com-
ponent video output (page 23) (TX-604/604E/8460
only).
If a video component is connected to an HDMI input,
your TV must be connected to the HDMI OUT.
While the Pure Audio listening mode (not North
American models) is selected, the video circuitry is
turned off and only video signals input through HDMI
IN can be output.
Video
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR8467 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR8467 in the language / languages: English as an attachment in your email.

The manual is 3,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR8467

Onkyo TX-SR8467 User Manual - French, Spanish - 184 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info