63833
99
Zoom out
Zoom in
Previous page
1/124
Next page
99
Zone 2
In addition to your main listening room, you can also enjoy playback in the other room, or as we call Zone 2. And, you
can select a different source for each room.
There are two ways you can connect Zone 2 speakers:
1. Connect them directly to the AV receiver/AV ampli-
fier.
2. Connect them to an amp in Zone 2.
Connecting Your Zone 2 Speakers Directly
to the AV receiver/AV amplifier
This setup allows 5.1-channel playback in your main
room and 2-channel stereo playback in Zone 2, with a
different source in each room. This is called Powered
Zone 2, as the Zone 2 speakers are powered by the AV
receiver/AV amplifier. Note that when Powered Zone 2
is turned off, you can enjoy 7.1-channel playback in your
main room.
Hookup
Connect your Zone 2 speakers to the AV receiver/AV
amplifier’s ZONE 2 L/R speaker terminals.
Notes:
With this setup, the Zone 2 volume is controlled by the
AV receiver/AV amplifier.
Powered Zone2 cannot be used if “Speakers Type” is
set to “Bi-Amp” (see page 47).
Connecting Your Zone 2 Speakers to an
Amp in Zone 2
This setup allows 7.1-channel playback in your main lis-
tening room and 2-channel stereo playback in Zone 2,
with a different source in each room.
Hookup
Use an RCA audio cable to connect the AV receiver/
AV amplifier’s ZONE 2 PRE OUT L/R jacks to an
analog audio input on your Zone 2 amp.
Connect your Zone 2 speakers to the speaker terminals
on your Zone 2 amp.
Note:
With the default settings, the Zone 2 volume must be set
on the Zone 2 amp. If your Zone 2 amp has no volume
control, set the “Zone2 Out” setting to “Variable” so that
you can set the Zone 2 volume on the AV receiver/AV
amplifier (see page 101).
Zone 2 12V Trigger
When Zone 2 is turned on, the output from the 12V
TRIGGER OUT ZONE 2 goes high (+12 volts, 100 mil-
liamperes max). Connecting this jack to a 12-volt trigger
input on a component in Zone 2 will make that compo-
nent turn on or off as and when Zone 2 is turned on or off
on the AV receiver/AV amplifier.
Connecting Zone 2
To use this setup, you must set the “Powered Zone2”
setting to “Act” (see page 100).
LR
Main room
Zone 2
TV
AV receiver/AV amplifier
R
L
IN
Main room
TV
Zone 2
AV receiver/AV amplifier
Receiver/
integrated amp
TX-SR806_En.book Page 99 Monday, August 4, 2008 10:25 AM
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR806 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR806 in the language / languages: English as an attachment in your email.

The manual is 9,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR806

Onkyo TX-SR806 User Manual - German - 242 pages

Onkyo TX-SR806 User Manual - Dutch - 242 pages

Onkyo TX-SR806 User Manual - Italian - 242 pages

Onkyo TX-SR806 User Manual - Swedish - 242 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info