63833
84
Zoom out
Zoom in
Previous page
1/124
Next page
84
Advanced Setup—Continued
Dimension
With this setting, you can move the sound field forward
or backward when using the Dolby Pro Logic II Music
or Dolby Pro Logic IIx Music listening mode. It can be
adjusted from –3 to +3 (default is 0). Lower settings
move the sound field forward. Higher settings move it
backward.
If the stereo image feels too wide, or there is too much
surround sound, move the sound field forward to
improve the balance. Conversely, if the stereo image
feels like it is in mono, or there is not enough surround
sound, move it backward.
Center Width
With this function, you can adjust the width of the sound
from the center speaker when using the Dolby Pro Logic
II Music or Dolby Pro Logic IIx Music listening mode.
Normally, if you are using a center speaker, the center
channel sound is output by only the center speaker. (If
you are not using a center speaker, the center channel
sound will be distributed to the front left and right speak-
ers to create a phantom center.) This setting controls the
front left, right, and center mix, allowing you to adjust
the weight of the center channel sound. It can be adjusted
from 0 to 7 (default is 3).
Neo:6 Music
Center Image
The DTS Neo:6 Music listening mode creates 6-channel
surround sound from 2-channel (stereo) sources. With
this setting, you can specify by how much the front left
and right channel output is attenuated in order to create
the center channel. It can be adjusted from 0 to 5 (default
is 2). This setting is unavailable if no surround speakers
are connected.
When set to 0, the front left and right channel output is
attenuated by half (–6 dB), giving the impression that the
sound is located centrally. This setting works well when
the listening position is considerably off center. When
set to 5, the front left and right channels are not attenu-
ated, maintaining the original stereo balance.
Dolby EX Input Signal Setting
Dolby EX
This setting determines how Dolby EX encoded signals
are handled. This setting is unavailable if no surround
back speakers are connected. This setting is effective
with Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only.
T-D (Theater-Dimensional) Listening
Setting
Listening Angle
With this setting, you can specify the angle of the front
left and right speakers relative to the listening position.
Processing for the Theater-Dimensional listening mode
is based on this setting. Ideally, the front left and right
speakers should be equidistant from the listening position
and at an angle close to one of the two available settings.
DSD Setting
DAC Direct
This setting determines whether or not DSD (SACD)
audio signals are passed through the DSP for A/V Sync,
delay, etc., processing when the Pure Audio or Direct lis-
tening mode is selected.
LFE Level Settings
With these settings, you can set the level of the LFE
(Low Frequency Effects) channel individually for Dolby
Digital, DTS, multichannel PCM, Dolby TrueHD, DTS-
HD Master Audio, and DSD sources. The level can be
set to –
, –10 dB, or 0 dB (default).
If you find that low-frequency effects are too loud when
using one of these sources, change the setting to –10 dB
or –
dB.
Dolby Digital
Sets the level of the LFE channel for Dolby Digital and
Dolby Digital Plus sources.
DTS
Sets the level of the LFE channel for DTS and DTS-HD
High Resolution sources.
Multich PCM
Sets the level of the LFE channel for multichannel PCM
sources. (Multichannel PCM is input via HDMI.)
Dolby TrueHD
Sets the level of the LFE channel for Dolby TrueHD sources.
DTS-HD Master Audio
Sets the level of the LFE channel for DTS-HD Master
Audio sources.
DSD
Sets the level of the LFE channel for DSD (SACD) sources.
Auto: If the source signal contains a Dolby EX
flag, the Dolby EX or THX Surround EX
listening mode is used (default).
Manual:
You can select any available listening mode.
Narrow: Select if the angle is less than 30 degrees.
Wide: Select if the angle is greater than 30
degrees (default).
No: DSD signals are processed by the DSP
(default).
Ye s: DSD signals are not processed by the DSP.
30˚
Front right speakerFront left speaker
TX-SR806_En.book Page 84 Monday, August 4, 2008 10:25 AM
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR806 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR806 in the language / languages: English as an attachment in your email.

The manual is 9,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR806

Onkyo TX-SR806 User Manual - German - 242 pages

Onkyo TX-SR806 User Manual - Dutch - 242 pages

Onkyo TX-SR806 User Manual - Italian - 242 pages

Onkyo TX-SR806 User Manual - Swedish - 242 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info