63833
39
Zoom out
Zoom in
Previous page
1/124
Next page
39
Connecting the AV Receiver/AV Amplifier—Continued
With u (Remote Interactive), you can use the follow-
ing special functions:
Auto Power On/Standby
When you start playback on a component connected
via u, if the AV receiver/AV amplifier is on
Standby, it will automatically turn on and select that
component as the input source. Similarly, when the
AV receiver/AV amplifier is set to Standby, all com-
ponents connected via u will also go on Standby.
Direct Change
When playback is started on a component connected
via u, the AV receiver/AV amplifier automatically
selects that component as the input source. If your
DVD player is connected to the AV receiver/AV
amplifier’s DVD multichannel input, you’ll need to
press the [MULTI CH] button repeatedly and select
“Multich” to hear all channels (see page 57), as the
Direct Change u function selects the DVD
FRONT L/R jacks.
Remote Control
You can use the AV receiver/AV amplifier’s remote
controller to control your other u-capable Onkyo
components, pointing the remote controller at the
AV receiver/AV amplifier’s remote control sensor
instead of the component. You must enter the appro-
priate remote control code first (see page 106).
Notes:
•Use only u cables for u connections. u cables
are supplied with Onkyo players (DVD, CD, etc.).
Some components have two u jacks. You can con-
nect either one to the AV receiver/AV amplifier. The
other jack is for connecting additional u-capable
components.
Connect only Onkyo components to u jacks. Con-
necting other manufacturer’s components may cause a
malfunction.
Some components may not support all u functions.
Refer to the manuals supplied with your other Onkyo
components.
While Zone 2 is on, the Auto Power On/Standby and
Direct Change u functions do not work.
Notes:
Before connecting the power cord, connect all of
your speakers and AV components.
Turning on the AV receiver/AV amplifier may cause a
momentary power surge that might interfere with
other electrical equipment on the same circuit. If this
is a problem, plug the AV receiver/AV amplifier into a
different branch circuit.
Do not use a power cord other than the one supplied
with the AV receiver/AV amplifier. The supplied
power cord is designed exclusively for use with the
AV receiver/AV amplifier and should not be used with
any other equipment.
Never disconnect the power cord from the AV
receiver/AV amplifier while the other end is still
plugged into a wall outlet. Doing so may cause an
electric shock. Always disconnect the power cord
from the wall outlet first, and then the AV receiver/AV
amplifier.
Connecting Onkyo u Components
Step 1:
Make sure that each Onkyo component is connected
to the AV receiver/AV amplifier with an analog audio
cable (connection in the hookup examples) (see
pages 25 to 36).
Step 2:
Make the u connection (see illustration below).
Step 3:
If you’re using an MD, CDR, or RI Dock, change the
Input Display (see page 50).
a
Connecting the Power Cord
LR
FRONT
DVD
L
R
IN
CD
L
R
REMOTE
CONTROL
ANALOG
AUDIO OUT
LR
ANALOG
AUDIO OUT
e.g., CD player
e.g., DVD player
Step 1:
Connect the supplied power cord to the AV
receiver/AV amplifier’s AC INLET.
Step 2:
Plug the power cord into an AC wall outlet.
To AC wall outlet
TX-SR806_En.book Page 39 Monday, August 4, 2008 10:25 AM
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR806 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR806 in the language / languages: English as an attachment in your email.

The manual is 9,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR806

Onkyo TX-SR806 User Manual - German - 242 pages

Onkyo TX-SR806 User Manual - Dutch - 242 pages

Onkyo TX-SR806 User Manual - Italian - 242 pages

Onkyo TX-SR806 User Manual - Swedish - 242 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info