63833
34
Zoom out
Zoom in
Previous page
1/124
Next page
34
Connecting the AV Receiver/AV Amplifier—Continued
Making HDMI Connections
Video Signals
Digital video signals received by the HDMI IN jacks are normally output by the HDMI OUT for display on your TV.
Composite video, S-Video, and component video sources can be upconverted for the HDMI output. See “Video Con-
nection Formats” on page 23 for more information.
Audio Signals
Digital audio signals received by the HDMI IN jacks are output by the speakers and headphones connected to the AV
receiver/AV amplifier. Normally, they are not output by the HDMI OUT, unless the “Audio TV Out” setting is set to
“On” (see page 95).
To listen to audio received by the HDMI IN jacks through your TV’s speakers, set the “Audio TV Out”
setting to “On” (see page 95), and set your DVD player’s HDMI audio output setting to PCM.
Notes:
The HDMI video stream is compatible with DVI (Digital Visual Interface), so TVs and displays with a DVI input can
be connected by using an HDMI-to-DVI adapter cable. (Note that DVI connections only carry video, so you’ll need
to make a separate connection for audio.) However, reliable operation with such an adapter is not guaranteed. In
addition, video signals from a PC are not supported.
When listening to an HDMI component through the AV receiver/AV amplifier, set the HDMI component so that its
video can be seen on the TV screen (on the TV, select the input of the HDMI component connected to the AV
receiver/AV amplifier). If the TV power is off or the TV is set to another input source, this may result in no sound
from the AV receiver/AV amplifier or the sound may be cut off.
When the “Audio TV Out” setting is set to “On” (see page 95), or “TV Control” is set to “Enable” (see page 96) and
you’re listening through your TV’s speakers, if you turn up the AV receiver/AV amplifier volume control, the sound
will be output by the AV receiver/AV amplifier’s speakers. To stop the AV receiver/AV amplifier’s speakers producing
sound, change the settings, change your TV’s settings, or turn down the AV receiver/AV amplifier’s volume.
The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the
picture is poor or there’s no sound from a component connected via HDMI, check its setup. Refer to the connected
component’s instruction manual for details.
Step 1:
Use HDMI cables to connect the AV receiver/AV amplifier’s HDMI jacks to your HDMI-compatible Blu-ray
player/DVD player, TV, projector, and so on.
Step 2:
Assign each HDMI IN to an input selector in the HDMI Input Setup (see page 44).
Hint!
HDMI
IN
HDMI HDMI
IN 1
(DVD)
HDMI
OUT
TV
Blu-ray player/DVD player
TX-SR806_En.book Page 34 Monday, August 4, 2008 10:25 AM
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR806 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR806 in the language / languages: English as an attachment in your email.

The manual is 9,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR806

Onkyo TX-SR806 User Manual - German - 242 pages

Onkyo TX-SR806 User Manual - Dutch - 242 pages

Onkyo TX-SR806 User Manual - Italian - 242 pages

Onkyo TX-SR806 User Manual - Swedish - 242 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info