645329
42
Zoom out
Zoom in
Previous page
1/184
Next page
It-
42
Setup della prima accensione
—Continua
Controllare i risultati
Se al punto 4 della pagina precedente avete selezionato
“Check the Results”, appare il seguente menu in cui
potete controllare i risultati del setup automatico degli
altoparlanti.
1. Warning—
Altoparlanti non rilevati e avvertimenti
sulle posizioni (si veda la colonna di destra).
2. Speaker Config—
Altoparlanti collegati e frequenze
di crossover.
3. Speaker Distance—
Distanza di ogni altoparlante
dalla posizione di ascolto.
4. Speaker Level Adjust—
Livello di volume ottimale di
ogni altoparlante.
5. Equalizer Settings—
Impostazioni d’equalizzatore
ottimali di ogni altoparlante.
Messaggi di avvertimento
Nei messaggi di avvertimento vengono utilizzate delle
abbreviazioni per indicare gli altoparlanti (per es. “L”
per left, sinistro, “R” per right, destro, e così via).
Not Detect:
L’altoparlante non è stato rilevato. Assicuratevi che
sia collegato correttamente.
Distance Error:
L’altoparlante è troppo vicino o troppo lontano
oppure non è stato possibile calcolare la distanza.
Spostate l’altoparlante.
Cambiare manualmente le impostazioni degli alto-
parlanti
In alcune situazioni le misure prese dal setup automatico
degli altoparlanti potrebbero non risultare utili. Se dopo
avere effettuato una seconda volta il setup automatico
degli altoparlanti non ottenete i risultati sperati, dovete
definire manualmente le impostazioni (si vedano le
pagine 66–71).
Tutti gli altoparlanti principali THX devono essere
impostati su “80Hz (THX)”. Se impostate gli altopar-
lanti utilizzando la funzione Automatic Speaker Setup,
accertatevi manualmente che gli altoparlanti THX siano
impostati su “80Hz (THX)” nell’impostazione Speaker
Cofiguration (si vedano le pagine 66, 67).
A causa della complessità elettrica dei subwoofer e
dell’interazione con la stanza, THX consiglia di impo-
stare manualmente il livello e la distanza del subwoofer.
Utilizzare un subwoofer amplificato
Se utilizzate un subwoofer amplificato, la sua uscita
potrebbe non essere rilevata in quanto di solito viene
posizionato in basso sul pavimento ed emette frequenze
molto basse. Se il subwoofer (abbreviazione“SW”)
appare nella schermata Warning sotto Not Detect,
aumentate il volume del subwoofer ed eseguite di nuovo
il setup automatico degli altoparlanti. Se il subwoofer ha
un crossover incorporato, impostatelo sulla frequenza di
crossover più alta. Se ha un interruttore di filtro LPF,
impostatelo su Off o Direct. Per maggiori dettagli con-
sultate il manuale di istruzioni del subwoofer.
Utilizzate i pulsanti Su e Giù
[ ]/[ ] per selezionare l’ele-
mento che volete controllare e
poi premete [ENTER].
Premete il pulsante [RETURN] per tor-
nare al menu precedente.
Auto Speaker Setup
========================
1.Warning
2.Speaker Config
3.Speaker Distance
4.Speaker Level Adjust
5.Equalizer Settings
ENTER
ENTER
1.Warning
========================
Not Detect:
Distance Error:
2.Speaker Config
========================
Front :80Hz(THX)
Center :80Hz(THX)
Surround :80Hz(THX)
SurrBack :80Hz(THX)
SurrBack ch :2ch
Subwoofer :No
3.Speaker Distance
========================
Left :12ft
Center :12ft
Right :12ft
Surround R : 7ft
SurrBack : 7ft
Surround L : 7ft
Subwoofer :12ft
4.Speaker Level Adjust
========================
Left : 0dB
Center : 0dB
Right : 0dB
Surround R : 0dB
SurrBack : 0dB
Surround L : 0dB
Subwoofer : 0dB
5.Equalizer Setting
========================
========================
80Hz : 0dB
250Hz : 0dB
800Hz : 0dB
2.5kHz : 0dB
8kHz : 0dB
Channel: Left
Quando avete terminato il con-
trollo premete il pulsante
[RETURN] per tornare al menu
del punto 4.
Auto Speaker Setup
========================
Apply the Results
Check the Results
Retry
Retry with
Test noise Level up
Cancel
TX-SR804E_It,De.book Page 42 Wednesday, September 6, 2006 4:06 PM
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR804 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR804 in the language / languages: German, Italian as an attachment in your email.

The manual is 8,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR804

Onkyo TX-SR804 User Manual - English - 96 pages

Onkyo TX-SR804 User Manual - Dutch - 184 pages

Onkyo TX-SR804 User Manual - French - 192 pages

Onkyo TX-SR804 User Manual - Swedish - 184 pages

Onkyo TX-SR804 User Manual - Spanish - 192 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info