481485
25
Zoom out
Zoom in
Previous page
1/76
Next page
25
En
Note
*1
If Pure Audio (European, Australian and Asian) or Direct
listening mode is selected, “Dynamic EQ” and
Dynamic Volume” cannot be selected.
*2
Only when you have selected “Custom” in the “Picture
Mode” ( 48), pressing ENTER allows you to adjust the fol-
lowing items via the Home menu; “Brightness”, “Contrast”,
Hue”, and “Saturation”. Press RETURN to return to the
original Home menu.
*3
Depending on the input source and listening mode, not all
channels shown here output the sound.
*4
When you have entered a custom name in “Name Edit”
( 47), the input source is displayed with that name. But
even if not, the component name may be displayed if the AV
receiver receives it via HDMI connection ( 17).
*5
For the PORT input selector, the name of Universal Port
Option Dock will be displayed.
When you connect an u-capable Onkyo component, you
must configure the input display so that u can work
properly.
This setting can be done only from the front panel.
Note
DOCK can be selected for the TV/CD, GAME or VCR/DVR
input selector, but not at the same time.
Enter the appropriate remote control code before using the
remote controller for the first time ( 62).
Note
Always turn down the volume before connecting your head-
phones.
While the headphones plug is inserted in the PHONES jack, the
speakers are turned off. (The Powered Zone 2 speakers are not
turned off.)
When you connect a pair of headphones, the listening mode is
set to Stereo, unless it’s already set to Stereo, Mono, Direct, or
Pure Audio (European, Australian and Asian models).
Only the Stereo, Direct, Pure Audio (European, Australian and
Asian models), and Mono listening modes can be used with
headphones.
With the supplied calibrated microphone, Audyssey 2EQ
automatically determines the number of speakers con-
nected, their size for purposes of bass management, opti-
mum crossover frequencies to the subwoofer (if present),
and distances from the primary listening position.
Audyssey 2EQ then removes the distortion caused by
room acoustics by capturing room acoustical problems
over the listening area in both the frequency and time
domain. The result is clear, well-balanced sound for every-
one. Enabling Audyssey 2EQ allows you to also use
Audyssey Dynamic EQ
, which maintains the proper
octave-to-octave balance at any volume level ( 45).
Before using this function, connect and position all of
your speakers.
If “Dynamic EQ” is set to “On” ( 45), the Equalizer
setting will be set to “Audyssey” ( 42). On the other
hand, if it is set to “Off”, the “Dynamic Volume” setting
will be set to Off” ( 46).
It takes about 15 minutes to complete Audyssey 2EQ
Room Correction and Speaker Setup for three positions.
Total measurement time varies depending on the number
of speakers.
Changing the Input Display
1
Press TV/CD, GAME or VCR/DVR so that “TV/
CD”, “GAME” or “VCR/DVR” appears on the
display.
2
Press and hold down TV/CD, GAME or VCR/DVR
(about 3 seconds) to change the input display.
Repeat this step to select “MD”, “CDR”, “DOCK
or “TAPE”.
For the TV/CD input selector, the input display
changes in this order:
For the GAME input selector, the setting changes in
this order:
For the VCR/DVR input selector, the setting
changes in this order:
TV/CD MD CDR
DOCK
TAPE
GAME DOCK
VCR/DVR DOCK
Using Headphones
Connect a pair of stereo headphones with a stan-
dard plug (1/4 inch or 6.3 mm) to the PHONES
jack.
Audyssey 2EQ
®
Room Correction and
Speaker Setup
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR608 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR608 in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR608

Onkyo TX-SR608 User Manual - German - 148 pages

Onkyo TX-SR608 User Manual - Dutch - 148 pages

Onkyo TX-SR608 User Manual - French - 152 pages

Onkyo TX-SR608 User Manual - Italian - 148 pages

Onkyo TX-SR608 User Manual - Swedish - 148 pages

Onkyo TX-SR608 User Manual - Spanish - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info