457627
102
Zoom out
Zoom in
Previous page
1/108
Next page
102
Troubleshooting—Continued
There’s no picture from a source connected to
an HDMI IN
Reliable operation with an HDMI-to-DVI adapter is
not guaranteed. In addition, video signals from a PC
are not supported (page 24).
If the message “Resolution Error” appears on the AV
receiver’s display, this indicates that your TV does not
support the current video resolution and you need to
select another resolution on your DVD player.
The onscreen menus don’t appear
On non-North American models, specify the TV system
used in your area in the “TV Format Setup” on page 44.
On your TV, make sure that the video input to which
the AV receiver is connected is selected.
The picture is distorted
On non-North American models, specify the TV system
used in your area in the “TV Format Setup” on page 44.
The immediate display does not appear
Depending on the input signal, the immediate display
may not appear when the input signal from the HDMI
IN is output to a device connected to the HDMI OUT.
Reception is noisy, FM stereo reception is
noisy, or the FM STEREO indicator doesn’t
appear
Relocate your antenna.
Move the AV receiver away from your TV or computer.
Listen to the station in mono (page 54).
When listening to an AM station, operating the remote
controller may cause noise.
Passing cars and airplanes can cause interference.
Concrete walls weaken radio signals.
If nothing improves the reception, install an outdoor
antenna.
The remote controller doesn’t work
Make sure that the batteries are installed with the cor-
rect polarity (page 13).
Install new batteries. Don’t mix different types of bat-
teries, or old and new batteries (page 13).
Make sure that the remote controller is not too far
away from the AV receiver, and that theres no
obstruction between the remote controller and the AV
receiver’s remote control sensor (page 13).
Make sure that the AV receiver is not subjected to
direct sunshine or inverter-type fluorescent lights.
Relocate if necessary.
If the AV receiver is installed in a rack or cabinet with
colored-glass doors, the remote controller may not
work reliably when the doors are closed.
Make sure you’ve selected the correct remote control-
ler mode (pages 14 and 93-99).
When using the remote controller to control other
manufacturers’ AV components, some buttons may
not work as expected.
Make sure you’ve entered the correct remote control
code (page 91).
Make sure to set the same ID on both the AV receiver
and remote controller (page 81).
Can’t control other components
If it’s an Onkyo component, make sure that the u
cable and analog audio cable are connected properly.
Connecting only an u cable won’t work (page 37).
Make sure you’ve selected the correct remote control-
ler mode (pages 14 and 93-99).
If you’ve connected an
u
-capable Onkyo MD recorder,
CD recorder, RI Dock to the TV/TAPE IN/OUT jacks, or
an RI Dock to the GAME IN or VCR/DVR IN jacks, for
the remote controller to work properly, you must set the
display to MD, CDR, or DOCK (page 45).
If you cannot operate it, you will need to enter the
appropriate remote control code (page 91).
To control another manufacturer’s component, point
the remote controller at that component.
To control an Onkyo component that’s connected via
u
,
point the remote controller at the AV receiver. Be sure to
enter the appropriate remote control code first (page 92).
To control an Onkyo component that’s not connected
via
u
, or another manufacturer’s component, point the
remote controller at the component. Be sure to enter the
appropriate remote control code first (page 91).
The entered remote control code may not be correct. If
more than one code is listed, try each one.
There’s no sound
Make sure your iPod is actually playing.
Make sure your iPod is inserted properly in the Dock.
Make sure the UP-A1 series Dock is connected to the
UNIVERSAL PORT jack on the AV receiver.
Make sure the AV receiver is turned on, the correct
input source is selected, and the volume is turned up.
Make sure the plugs are pushed in all the way.
Try resetting your iPod.
There’s no video
Make sure that your iPod’s TV OUT setting is set to On.
Make sure the correct input is selected on your TV or
the AV receiver.
Some versions of the iPod do not output video.
The AV receiver’s remote controller doesn’t
control your iPod
Make sure your iPod is properly inserted in the Dock.
If your iPod is in a case, it may not connect properly
to the Dock. Always remove your iPod from the case
before inserting it into the Dock.
The iPod cannot be operated while it’s displaying the
Apple logo.
Make sure you’ve selected the right remote mode.
When you use the AV receiver’s remote controller,
point it toward your amp.
Tuner
Remote Controller
Dock for iPod
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo Tx-sr607 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo Tx-sr607 in the language / languages: English as an attachment in your email.

The manual is 9,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo Tx-sr607

Onkyo Tx-sr607 User Manual - German - 212 pages

Onkyo Tx-sr607 User Manual - Dutch - 212 pages

Onkyo Tx-sr607 User Manual - French - 212 pages

Onkyo Tx-sr607 User Manual - Italian - 212 pages

Onkyo Tx-sr607 User Manual - Swedish - 212 pages

Onkyo Tx-sr607 User Manual - Spanish - 212 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info