62549
96
Zoom out
Zoom in
Previous page
1/100
Next page
96
Troubleshooting—Continued
If the video source is connected to a component video
input, your TV must be connected to the COMPO-
NENT VIDEO OUT or HDMI OUT (page 25).
If the video source is connected to an HDMI input,
your TV must be connected to the HDMI OUT
(page 25).
While the Pure Audio listening mode (not North
American models) is selected, the video circuitry is
turned off and only video signals input through HDMI
IN can be output.
On your TV, make sure that the video input to which
the AV receiver/AV amplifier is connected is selected.
There’s no picture from a source connected to
an HDMI IN
If the message “Resolution Error” appears on the AV
receiver/AV amplifier’s display, this indicates that the
TV or display does not support the current video reso-
lution and you need to select another resolution on
your DVD player.
The onscreen menus don’t appear
The onscreen menus may do not appear on a TV that’s
connected to the HDMI OUT. When the HDMI Mon-
itor Out is set to No (page 47), the onscreen menus are
output at a resolution of 480i. If the onscreen menus
do not appear, set the HDMI Monitor Out to Yes
(page 47).
Make sure that the video settings are correct (page 48).
On your TV, make sure that the video input to which
the AV receiver/AV amplifier is connected is selected.
The immediate display does not appear
The immediate display appears on a device connected
to the COMPONENT VIDEO OUT, when the Com-
ponent Video Setup (page 49) is set to “---.
If both of the HDMI Video Setup (page 48) and the
Component Video Setup (page 49) are set to “---,” the
immediate display is output to a device connected to
the HDMI OUT.
Reception is noisy, FM stereo reception is
noisy, or the FM STEREO indicator doesn’t
appear
Relocate your antenna.
Move the AV receiver away from your TV or com-
puter.
Listen to the station in mono (page 57).
When listening to an AM station, operating the remote
controller may cause noise.
Passing cars and airplanes can cause interference.
Concrete walls weaken radio signals.
If nothing improves the reception, install an outdoor
antenna.
The remote controller doesn’t work
Make sure that the batteries are installed with the cor-
rect polarity (page 12).
Install new batteries. Don’t mix different types of bat-
teries, or old and new batteries (page 12).
Make sure that the remote controller is not too far
away from the AV receiver/AV amplifier, and that
there’s no obstruction between the remote controller
and the AV receiver/AV amplifier’s remote control
sensor (page 12).
Make sure that the AV receiver/AV amplifier is not
subjected to direct sunshine or inverter-type fluores-
cent lights. Relocate if necessary.
If the AV receiver/AV amplifier is installed in a rack
or cabinet with colored-glass doors, the remote con-
troller may not work reliably when the doors are
closed.
Make sure you’ve selected the correct remote control-
ler mode (pages 13-16).
When using the remote controller to control other
manufacturers’ AV components, some buttons may
not work as expected.
Make sure you’ve entered the correct remote control
code.
Make sure to set the same ID on both the AV receiver/
AV amplifier and remote controller (pages 83 and 86).
Can’t control other components
If it’s an Onkyo component, make sure that the
cable and analog audio cable are connected properly.
Connecting only an cable won’t work (page 39).
Make sure you’ve selected the correct remote control-
ler mode (pages 13-16).
If you’ve connected an -capable Onkyo MD
recorder, CD recorder, Dock to the TAPE IN/
OUT jacks, or an Dock to the GAME/TV IN
jacks, for the remote controller to work properly, you
must set the display to MD, CDR, or DOCK (pages 51
and 91).
To control another manufacturer’s component, point
the remote controller at that component.
To control an Onkyo component that’s connected via
, point the remote controller at the AV receiver/AV
amplifier. Be sure to enter the appropriate remote con-
trol code first (page 91).
To control an Onkyo component that’s not connected
via , or another manufacturer’s component, point
the remote controller at the component. Be sure to enter
the appropriate remote control code first (page 90).
Tuner (TX-SR605 only)
Remote Controller
96


Need help? Post your question in this forum.

Forumrules
1

Forum

onkyo-tx-sr605

Reset search

  • Hello, where can I attach the groung wire of my turntable to the onkio TX-SR605. Thank you Submitted on 5-7-2023 at 16:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR605 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR605 in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR605

Onkyo TX-SR605 User Manual - German - 196 pages

Onkyo TX-SR605 User Manual - Dutch - 196 pages

Onkyo TX-SR605 User Manual - French - 196 pages

Onkyo TX-SR605 User Manual - Italian - 196 pages

Onkyo TX-SR605 User Manual - Swedish - 196 pages

Onkyo TX-SR605 User Manual - Spanish - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info