Manual Onkyo TX-SR605 (page 71 of 100) (English)

62549

Zoom out

Zoom in

1/100

Advanced Setup—Continued

Low-Pass Filter for the LFE Channel

With this setting, you can specify the cutoff frequency of

the LFE channel’s low-pass filter (LPF), which can be

used to filter out unwanted hum. The LPF only applies to

sources that use the LFE channel.

Double Bass

With the Double Bass function, you can boost bass out-

put by feeding bass sounds from the front left and right

channels to the subwoofer. This function can be set only

if the Subwoofer setting in step 4 is set to Yes, and the

Front setting in step 5 is set to Full Band.

In the speaker setup screen, you can choose how bass

information is distributed to your speakers only if you

have large front left and right speakers AND a subwoofer.

Note:

This procedure can also be performed on the AV

receiver/AV amplifier by using its [SETUP] button,

arrow buttons, and [ENTER] button.

Use the Up and Down [ ]/[ ]

buttons to select “Center,” and

then use the Left and Right [ ]/

[ ] buttons to select a crossover

frequency.

If no center speaker is connected, select

None.

Note:

If the Front setting in step 5 is set to

anything other than Full Band, Full

Band cannot be selected here.

Use the Up and Down [ ]/[ ]

buttons to select “Surround,”

and then use the Left and Right

[ ]/[ ] buttons to select a

crossover frequency.

If no surround left and right speakers

are connected, select None.

Note:

If the Front setting in step 5 is set to

anything other than Full Band, Full

Band cannot be selected here.

Use the Up and Down [ ]/[ ]

buttons to select “Surr Back,”

and then use the Left and Right

[ ]/[ ] buttons to select a

crossover frequency.

If no surround back speakers are con-

nected, select None.

Notes:

• If the Surround setting in step 7 is set

to None, this setting cannot be

selected.

• If the Surround setting in step 7 is set

to anything other than Full Band,

Full Band cannot be selected here.

Use the Up and Down [ ]/[ ]

buttons to select “Surr Back Ch,”

and then use the Left and Right

[ ]/[ ] buttons to select:

1ch: Select if one surround back

speaker is connected.

2ch: Select if two (left and right)

surround back speakers are

connected.

Note:

If the Surr Back Setting in step 8 is set

to None, this setting cannot be selected.

Continue with step 10 in the right col-

umn.

Use the Up and Down [ ]/[ ]

buttons to select “LPF of LFE,”

and then use the Left and Right

[ ]/[ ] buttons to select a low-

pass filter frequency.

The following low-pass filter frequen-

cies can be selected: 80 Hz, 100 Hz, or

120 Hz (default).

Continue with step 11 below.

Use the Up and Down [ ]/[ ]

buttons to select “Double Bass,”

and then use the Left and Right

[ ]/[ ] buttons to select:

On: Double Bass function on

(default). Front left and right

bass also goes to the sub-

woofer simultaneously.

Off: Double Bass function off.

Press the [SETUP] button.

The setup menu closes.

This setting is not set automatically by the Automatic

Speaker Setup function (see page 41).

This setting is not set automatically by the Automatic

Speaker Setup function (see page 41).

Hello, where can I attach the groung wire of my turntable to the onkio TX-SR605. Thank you Submitted on 5-7-2023 at 16:31
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR605 in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR605

Onkyo TX-SR605 User Manual - German - 196 pages

Onkyo TX-SR605 User Manual - Dutch - 196 pages

Onkyo TX-SR605 User Manual - French - 196 pages

Onkyo TX-SR605 User Manual - Italian - 196 pages

Onkyo TX-SR605 User Manual - Swedish - 196 pages

Onkyo TX-SR605 User Manual - Spanish - 196 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Onkyo TX-SR605 Manual

Product: