Manual Onkyo TX-SR602E (page 75 of 96) (English)

469382

Zoom out

Zoom in

1/96

Advanced Setup—Continued

6-3. OSD Setup

■ a. Immediate Display

This preference determines whether or not actions, such

as selecting an input source, are displayed onscreen.

Normal: Select if your TV is 4:3.

Wide: Select if your TV is 16:9.

Off: Actions not displayed.

Even if this preference is set to Normal or Wide, actions

are not displayed on the TV or projector that’s connected

to the COMPONENT VIDEO OUT.

■ b. Scan Mode

If the text in onscreen setup menus ﬂickers due to com-

patibility with the connected display device (TV, projec-

tor, etc), set the Scan Mode to Non-Interlaced.

Interlaced:Default.

Non-Interlaced:Select if the text ﬂickers.

• Depending on the display device, when Non-Inter-

laced is selected, the onscreen setup menus may not

appear. If this happens, use the AV receiver’s display

and repeat the procedure to revert to Interlaced.

6-4. Remote Setup

■ a. Remote ID

With this setting, you can change the AV Receiver’s

remote control ID. You may need to change this if the

remote controller’s control codes overlap with those of

another Onkyo component located in the same room.

• If you change the AV receiver’s remote control ID, be

sure to set the same ID on both the AV receiver and

remote controller (see right column). The default ID

for both is 1.

■ b. IR IN Position

When using a commercially available IR receiver, use

this setting to specify its location.

Main: Select if the IR receiver is located in the main

room.

Zone 2: Select if the IR receiver is located in, and will

be used to control Zone 2.

6-5. Digital Format

This setting does not apply to input selectors not

assigned to a digital input jack.

With this setting, you can set a digital input to DTS,

PCM, or Auto. This can be set for each input selector

individually.

Use the Up and Down [ ]/[ ] buttons to select the

input selector that you want to set, and then use the Left

and Right [ ]/[ ] buttons to select:

Auto: PCM, Dolby Digital, and DTS formats are

accepted. If no digital signal is present, the ana-

log input is used.

DTS: Select this option if playing a DTS CD with the

Auto option produces noise while the AV

receiver is identifying the DTS signal, or when

using fast forward or fast reverse. Nothing is

output if the input signal is not DTS.

PCM: Select this option if playing a CD or other PCM

source with the Auto option causes the tops of

tracks to be clipped. Nothing is output if the

input signal is not PCM.

• If there is no digital connection, only Auto appears.

• Select Auto or DTS when playing a DTS CD or LD. If

you select PCM, only noise will be heard.

If several Onkyo components are used in the same room,

the remote controller’s control codes may overlap with

those of another component. To differentiate the remote

controller’s control codes, you can change its ID to

another number.

Notes:

If you change the remote controller’s ID, be sure to set

the same ID on both the remote controller and AV

receiver (see 6-4. Remote Setup in the left column). The

default ID for both is 1.

Changing the Remote Controller’s ID

Press and hold down the [RECEIVER]

button, and then press the TV [INPUT]

button.

Use the number buttons to enter a remote

control ID.

You can enter 1, 2, or 3.

Number

buttons

6_Advnced_En Page 75 Monday, July 26, 2004 1:58 PM

My onkyo receiver does not work with other listening modes than direct and pure audio Submitted on 19-5-2020 at 10:37
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR602E in the language / languages: English as an attachment in your email.

The manual is 14,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR602E

Onkyo TX-SR602E User Manual - German - 190 pages

Onkyo TX-SR602E User Manual - Dutch - 190 pages

Onkyo TX-SR602E User Manual - Italian - 190 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Onkyo TX-SR602E Manual

Product: