61856
91
Zoom out
Zoom in
Previous page
1/96
Next page
91
Troubleshooting
—Continued
The surround back speakers produce no sound
The surround back speakers are not used with all lis-
tening modes. Try another listening mode (page 55).
Not much sound may be produced by the surround
back speakers with some sources.
Check the Speaker Configuration (page 67).
While Powered Zone 2 is being used, playback in the
main room is reduced to 5.1-channels and the sur-
round back speakers produce no sound (page 77).
The subwoofer produces no sound
If the source material contains no audio in the LFE
channel, the subwoofer produces no sound.
Check the Speaker Configuration (page 67).
The Zone 2 speakers produce no sound
The Zone 2 speakers only output sources that are con-
nected to an analog input. Check to see if the source
component is connected to an analog input.
•Powered Zone 2 cannot be used if Speaker Sp Type is
set to Bi-Amp (page 38).
There’s no sound with a certain signal format
Check the digital audio output setting on the source
component. On some game consoles, such as those
that can play DVDs, the default setting is off.
•With some DVD-Video discs, you need to select an
audio format from a menu or with the AUDIO button
on your DVD player’s remote controller.
Can’t get 6.1- or 7.1-channel playback
While Powered Zone 2 is being used, playback in the
main room is reduced to 5.1-channels and the sur-
round back speakers produce no sound (page 77).
Can’t select the Pure Audio listening mode
The Pure Audio listening mode cannot be selected
while Zone 2 is on.
The Pure Audio listening mode is not available on the
North American model.
The volume cannot be set to 79 (99)
Check to see if a maximum volume has been set
(page 73).
After the Automatic Speaker Setup function has been
run, or the volume level of each individual speaker has
been adjusted (pages 36 and 70), the maximum vol-
ume may be reduced.
When the levels of each speaker have been adjusted
(page 70), the maximum possible volume may be
reduced.
Noise can be heard
Using cable ties to bundle audio cables with power
cords, speaker cables, and so on can degrade audio
performance, so don’t use them.
An audio cable may be picking up interference. Try
repositioning your cables.
When the Equalizer setting (page 71) is set to
Audyssey, the maximum possible volume is reduced
by 6 dB.
The Late Night function doesn’t work
Make sure that the source is Dolby Digital (page 64).
The analog multichannel input doesn’t work
Check the multichannel input connections (page 24).
Make sure that the multichannel input is selected
(page 45).
Check the audio output settings on your DVD player.
About DTS signals
When playing DTS program material, using the pause,
fast forward, or fast reverse function on your player
may produce a short audible noise. This is not a mal-
function.
When DTS program material ends and the DTS bit-
stream stops, the AV receiver remains in DTS listen-
ing mode and the DTS indicator remains on. This is to
prevent noise when you use the pause, fast forward, or
fast reverse function on your player. If you switch your
player from DTS to PCM, as the AV receiver does not
switch formats immediately, you may not hear any-
thing, in which case you should stop your player for
about 3 seconds, and then resume playback.
•With some CD players, you won’t be able to playback
DTS material properly even though your player is con-
nected to a digital input on the AV receiver. This is
usually because the DTS bitstream has been processed
(e.g., output level, sampling rate, or frequency
response changed) and the AV receiver doesn’t recog-
nize it as a genuine DTS signal. In such cases, you
may hear noise.
The beginning of audio received by an HDMI IN
can’t be heard
Since it takes longer to identify the format of an
HDMI signal than it does for other digital audio sig-
nals, sound may not be output immediately.
There’s no picture
Make sure that all video connecting plugs are pushed
in all the way (page 20).
Make sure that each video component is properly con-
nected.
On your TV, make sure that the video input to which
the AV receiver is connected is selected.
While the Pure Audio listening mode is selected, the
video circuitry is turned off and only the HDMI OUT
outputs video signals.
The AV receiver does not convert between formats, so
if a video source component is connected to a compo-
nent video input, your TV must be connected to the
component video output (page 21).
If the video source is connected to an HDMI input,
your TV must be connected to the HDMI OUT
(page 21).
Video
TX-SR506_En.book Page 91 Friday, March 7, 2008 1:35 PM
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR576 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR576 in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR576

Onkyo TX-SR576 User Manual - German - 192 pages

Onkyo TX-SR576 User Manual - Dutch - 192 pages

Onkyo TX-SR576 User Manual - French - 192 pages

Onkyo TX-SR576 User Manual - Italian - 192 pages

Onkyo TX-SR576 User Manual - Swedish - 192 pages

Onkyo TX-SR576 User Manual - Spanish - 192 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info