645342
34
Zoom out
Zoom in
Previous page
1/80
Next page
34
First Time Setup
—Continued
If the impedance of any of the connected speakers is 4
ohms or more but less than 6, set the minimum speaker
impedance to “4 ohms.
Note:
Before you change this setting, turn down the volume.
Note:
This procedure can also be performed on the AV
receiver by using the [SETUP], [ENTER], and arrow
buttons.
This section explains how to specify your speaker con-
figuration.
For speakers with a cone diameter
larger than 6-1/2 inches (16 cm),
specify
Large
(full band)
.
For those
with a smaller diameter, specify
Small
(default crossover 100 Hz)
.
The crossover frequency can be
changed on page 55.
Minimum Speaker Impedance Setup
(not North American model)
1
Press the [RECEIVER] button, followed
by the [SETUP] button.
2
Use the Up and Down [ ]/[ ] buttons
to select “0. Hardware Setup, and then
press [ENTER].
3
Use the Left and Right [ ]/[ ] buttons
to select the setting for “Impedance.
4 ohms:
Select if the impedance of any con-
nected speaker is 4 ohms or more but
less than 6.
6 ohms:
Select if the impedances of all con-
nected speakers are between 6 and
16 ohms.
Press the [RETURN] button to go to step 2 of
the “Speaker Configuration” (next column).
MUTING
PREVIOUS
MENU
GUIDE
TOP MENU
SP A
/
B
SETUPRETURN
PLAYLIST/CAT PLAYLIST/CAT
--
/
---
TAPE
M
D/CDR
HDD
CABLE
ON/STANDBY
DIMMER
ENT
D TUN
SLEEP
10 11 12
INPUT SELECTOR
REMOTE MODE
V
1
V
2
V
3
C
DTAPE TUNER
DVD
MULTI CH
LISTENING MODE
TV
SURROUND
STEREO
VOL
VOL
SAT
VCR
TV
DVD
RECEIVER
C
D
INPUT
+
10
0
CLR
123
456
789
ENTER
CH
DISC
ALBUM
RETURN
1
1, 9
2–8
Speaker Configuration
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
2
Use the Up and Down [ ]/[ ]
buttons to select “1. SP Config,
and then press [ENTER].
3
While the “Subwoofer” setting is
selected, use the Left and Right
[ ]/[ ] buttons to select
Yes
or
No
.
Yes:
Select if a subwoofer is con-
nected.
No:
Select if no subwoofer is con-
nected.
4
Use the Down [ ] button to
select “Front, and then use the
Left and Right [ ]/[ ] buttons to
select
Small
or
Large
.
Small:
Select if the front speakers are
small.
Large:
Select if the front speakers are
large.
Note:
If the Subwoofer setting in step 3 is
set to No, this setting is fixed at Large
and does not appear.
Cone diameter
RECEIVER
SETUP
TX-SR504_En.book Page 34 Thursday, February 2, 2006 3:46 PM
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR504E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR504E in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR504E

Onkyo TX-SR504E User Manual - German - 138 pages

Onkyo TX-SR504E User Manual - Dutch - 138 pages

Onkyo TX-SR504E User Manual - French - 146 pages

Onkyo TX-SR504E User Manual - Italian - 138 pages

Onkyo TX-SR504E User Manual - Swedish - 138 pages

Onkyo TX-SR504E User Manual - Spanish - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info