645311
39
Zoom out
Zoom in
Previous page
1/60
Next page
39
Common Functions
—Continued
With this function you can temporarily mute the output
of the TX-SR502/TX-SR502E.
To unmute the TX-SR502/TX-SR502E,
press the
remote controller’s [MUTING] button again, or adjust
the volume. The output is unmuted and the MUTING
indicator goes off.
Muting is cancelled when the TX-SR502/TX-SR502E is
set to Standby.
You can adjust individual speaker levels while listening
to an input source. These temporary adjustments are can-
celled when the TX-SR502/TX-SR502E is set to
Standby.
Notes:
•You cannot use this function while the TX-SR502/
TX-SR502E is muted.
Speakers that are set to No or None in the Speaker
Configuration cannot be adjusted.
With the sleep timer you can set the TX-SR502/
TX-SR502E so that it automatically turns off after a set
period.
To cancel the sleep timer,
press the [SLEEP] button
repeatedly until the SLEEP indicator disappears.
To check the remaining sleep time,
press the [SLEEP]
button. Note that if you press the [SLEEP] button while
the sleep time is being displayed, you’ll shorten the sleep
time by 10 minutes.
You can connect a pair of stereo headphones (1/4-inch
phone plug) to the TX-SR502/TX-SR502E’s PHONES
jack for private listening, as shown.
Notes:
•Always turn down the volume before connecting your
headphones.
Speaker sets A and B are turned off while the head-
phones plug is inserted in the PHONES jack.
When you connect a pair of headphones, the listening
mode is set to Stereo, unless it’s already set to Pure
Audio, Stereo or Direct. When you disconnect the
headphones, the previous listening mode is selected.
When the multichannel DVD input is selected, only
the front left and front right sounds can be heard in the
headphones.
Muting the TX-SR502/TX-SR502E
Press the remote controller’s
[MUTING] button.
The output is muted and the MUTING
indicator flashes on the display, as
shown.
Adjusting Speaker Levels
Temporarily
1
Use the remote controller’s
[CH SEL] button to select each
speaker, and use the [LEVEL–]
and [LEVEL+] buttons to adjust
the volume.
Speakers are selected in the following
order: Left
Center
Right
Surr
Right
Surr Back
Surr Left
Subwoofer.
You can adjust the volume of each
speaker from –12 dB to +12 dB
(–15 dB to +12 dB for the subwoofer).
The name of the currently selected
speaker and its volume appear on the
display, as shown.
MUTING
CH SEL
LEVEL
+
LEVEL
-
Using the Sleep Timer
Press the [SLEEP] button repeat-
edly to select the required sleep
time.
You can set the sleep time from 90 to 10
minutes in 10 minute steps.
The SLEEP indicator appears on the
display when the sleep timer has been
set, as shown. The specified sleep time
appears on the display for about five
seconds, then the previous display
reappears.
Using Headphones
SLEEP
SLEEP indicator
STANDBY/ON
POWER
PHONES
OFFON
SPEAKERS BA
TX-SR502_En.book Page 39 Tuesday, February 17, 2004 12:14 PM
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR502E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR502E in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR502E

Onkyo TX-SR502E User Manual - German, Dutch - 236 pages

Onkyo TX-SR502E User Manual - French - 120 pages

Onkyo TX-SR502E User Manual - Italian, Swedish - 236 pages

Onkyo TX-SR502E User Manual - Spanish - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info