645311
31
Zoom out
Zoom in
Previous page
1/60
Next page
31
Turning On
Notes: (not for the American model)
The TX-SR502/TX-SR502E is shipped with the
POWER switch in the ON position ( ). When the
power cord is connected for the very first time, the
TX-SR502/TX-SR502E will enter Standby and the
STANDBY indicator will light up.
•To completely shutdown the TX-SR502/TX-SR502E,
set the POWER switch to the OFF position ( ).
First Time Setup
To enjoy Dolby Digital and DTS, you must connect your
DVD player to the TX-SR502/TX-SR502E by using a
digital audio connection (coaxial or optical).
With this function you can assign digital audio inputs to
input sources. You only need to change these assign-
ments if your connections don’t match the default
assignments listed below.
For example, if you connect your DVD player to the
COAXIAL DIGITAL IN, you’ll need to change the
DVD input source from OPT 1 to COAX, and change the
CD input source to something other than COAX.
If you want to use the TAPE input source with only the
analog TAPE IN sockets, you’ll need to change the
TAPE assignment from “OPT3” to “----” (Analog).
You can change the assignments as follows.
Turning On the TX-SR502/TX-SR502E
1
Set the [POWER] switch to the
ON position ( ). (Skip this step if
you have American model.)
The TX-SR502/TX-SR502E enters
Standby mode, and the STANDBY
indicator comes on.
Note:
The remote controller has no effect
while the [POWER] switch in the
OFF position.
2
Press the [STANDBY/ON] button.
Alternatively, press the remote
controller’s [AMP] button fol-
lowed by the [ON] button.
The TX-SR502/TX-SR502E comes on,
the display lights up, and the
STANDBY indicator goes off.
To turn off the TX-SR502/
TX-SR502E, press the [STANDBY/
ON] button. The TX-SR502/
TX-SR502E will enter Standby mode.
To prevent any loud surprises the next
time you turn on your TX-SR502/
TX-SR502E, always turn down the vol-
ume before turning it off.
CD
+
10 0
CLEAR
123
456
789
V1 V2 V3
DVD MULTI CH
--/---
TAPE TUNER
INPUT
I
+
-
AMP
+
_
TONE
TUNER/
TAPE
ON STANDBY
T
V
TV CH
T
V VOL
REMOTE MODE
STANDBY/ON
PHONES
SPEAKERS BA
STANDBY/ON
POWER
PHONES
OFFON
SPEAKERS BA
STANDBY/ONSTANDBY/ON
POWER
STANDBY
ON
American
model
Other
models
POWER
OFFON
STANDBY/ON
STANDBY
ON
Remote
controller
Assigning the Digital Inputs to Input
Sources
Input source DIGITAL INPUT
DVD OPT1 (OPTICAL 1)
VIDEO 1 - - - - (Analog)
VIDEO 2 OPT2 (OPTICAL 2)
VIDEO 3 - - - - (Analog)
TAPE OPT3 (OPTICAL 3)
CD COAX (COAXIAL)
1
Press the input selector button
for the source that you want to
assign.
(Digital inputs cannot be assigned to
the TUNER input source.)
2
Press the [DIGITAL INPUT]
button.
The current assignment appears.
3
Press the [DIGITAL INPUT] but-
ton repeatedly to select COAX,
OPT1, OPT2, OPT3, or – – – –.
STANDBY/ON
PHONES
STANDBY
DISPLAYTONE TUNING MODEDIGITAL INPUT
LISTENING
MODE
STEREO
MEMORY
RETURNSETUP
VIDEO 2
TAPE TUNER
C
D
VIDEO
3
DVD
VIDEO
1
VCR
MULTI CH
MASTER VOLUME
TUNING
ENTER
PRESET
S VIDEO
VIDEO
AUDIO
LR
VIDEO 3
INPUT
CLEAR
SPEAKERS BA
DIGITAL INPUT
Input selector buttons
VIDEO 2
TAPE
C
D
VIDEO
3
DVD
VIDEO
1
VCR
DIGITAL INPUT
DIGITAL INPUT
TX-SR502_En.book Page 31 Tuesday, February 17, 2004 12:14 PM
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR502E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR502E in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR502E

Onkyo TX-SR502E User Manual - German, Dutch - 236 pages

Onkyo TX-SR502E User Manual - French - 120 pages

Onkyo TX-SR502E User Manual - Italian, Swedish - 236 pages

Onkyo TX-SR502E User Manual - Spanish - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info