Manual Onkyo TX-SR494 (page 69 of 100) (English)

686346

Zoom out

Zoom in

1/100

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

1. Input/Output Assign

 1. TV Out / OSD

Make settings for TV output and On-Screen Displays (OSD) that appear on the

TV.

Setting Item Default Value Setting Details

1080p -> 4K

Upscaling

Off When using a TV that supports 4K, video signals

input at 1080p can be automatically upscaled to 4K

for output.

"Off": When this function is not to be used

"Auto": When this function is to be used

Select "Off" if your TV does not support 4K.

• If the TV does not support the 4K resolution

with the same frequency as the frequency of

HDMI input video signals, upscaling to 4K is not

correctly performed. Check the frequency of 4K

resolution supported by the TV, and change the

resolution of the video signals input from the AV

component.

Super Resolution 2 When you have set "1080p -> 4K Upscaling" to

"Auto", you can select the degree of video signal

correction from "Off" and between "1" (weak) and

"3" (strong).

OSD Language English Select the on-screen display language from the

following.

(North American models) English, German, French,

Spanish, Italian, Dutch, Swedish

(European, Australian and Asian models) English,

German, French, Spanish, Italian, Dutch, Swedish,

Russian, Chinese

Setting Item Default Value Setting Details

Impose OSD On Set whether or not to display information such as

volume adjustment or switching of input on the TV

screen.

"On": OSD is displayed on the TV.

"Off": OSD is not displayed on the TV.

• OSD may not be displayed depending on the

input signal even if "On" is selected. In this case,

change the resolution of the connected device.

Mini Player OSD Always On You can display on the TV the images from another

input selected last while playing the audio from

BLUETOOTH input. After switching the input to

BLUETOOTH, play the images and audio. And then

when you press MODE on the remote controller,

the image is displayed in full-screen mode, and the

audio information (Mini Player) for BLUETOOTH is

displayed in the corner of the screen. You can set

whether to always display this Mini Player on the

screen.

"Always On": The Mini Player is always displayed.

"Auto Off": The Mini Player turns off automatically

in 30 seconds after displayed. If operation such as

changing the volume is performed, it is displayed

again for 30 seconds.

• Each time the MODE button is pressed, the

image display/non-display can be switched.

• This setting cannot be selected if "Impose OSD"

is set to "Off".

• When "OSD Language" is set to Chinese, this

function cannot be used. (European, Australian

and Asian models)

Screen Saver 3 minutes Set the time to start the screen saver.

Select a value from "3 minutes", "5 minutes",

"10 minutes" and "Off".

I have connected my Onkyo receiver to my projector thru the HDMI out but have received the message "signal out of reach". My TV which is close to the av receiver works ok when using the HDMI out. The projector is on the ceiling in line with the ceiling speakers and they work Ok when the tv is used,
How do I correct this? Submitted on 6-1-2024 at 06:37
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR494 in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR494

Onkyo TX-SR494 User Manual - German - 102 pages

Onkyo TX-SR494 User Manual - Dutch - 101 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Onkyo TX-SR494 Manual

Product: