Manual Onkyo TX-SR494 (page 58 of 100) (English)

686346

Zoom out

Zoom in

1/100

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

• This mode cannot be selected when "Speaker Virtualizer" ( p75) is set to

"Off" (Default: On).

 DTS:X

This mode faithfully reproduces the sound design recorded in the DTS:X audio

format.

The DTS:X audio format is a combination of the mixing method based on

traditional channel based formats (5.1 ch and 7.1 ch) and object based dynamic

audio mixing, and it is characterized by the precise positioning of sounds and the

ability to express sound movement.

• To enable transfer of this audio format, connect via an HDMI cable and set

audio output on the player to Bitstream output.

 ES Discrete (DTS-ES Discrete)

This mode faithfully reproduces the sound design recorded in the DTS-ES

Discrete audio format.

DTS-ES Discrete is an optional audio format based on 5.1 ch for DVD-Video and

Blu-ray Discs. It is possible to record a maximum of 6.1 channels with a monaural

surround back channel added.

• To enable transfer of this audio format, connect via a digital cable and set

audio output on the player to Bitstream output.

 ES Matrix (DTS-ES Matrix)

This mode faithfully reproduces the sound design recorded in the DTS-ES Matrix

audio format.

DTS-ES Matrix is an optional audio format based on 5.1 ch for DVD-Video and

Blu-ray Discs. A monaural surround back channel is inserted to this format by

matrix encoding. During playback, 6.1 channel-playback is achieved by the matrix

decoder on this unit.

• To enable transfer of this audio format, connect via a digital cable and set

audio output on the player to Bitstream output.

 Full Mono

In this mode, all speakers output the same sound in mono, so the sound you hear

is the same regardless of where you are within the listening room.

 Mono

In this mode, monaural audio is played from the center speaker at the time of

inputting an analog signal or PCM signal. If there is no center speaker connected,

monaural audio is played from the front speakers.

 Multich (Multichannel)

This mode is suitable to play sources recorded in multichannel PCM.

 Orchestra

This mode is suitable for classical or operatic music. This mode emphasizes the

surround channels in order to widen the sound image, and simulates the natural

reverberation of a large hall.

 Stereo

In this mode, sound is output from the right and left front speakers and

subwoofer.

 Studio-Mix

This mode is suitable for rock or pop music. This mode creates a lively sound

eld with a powerful acoustic image as if you are at a club or rock concert.

 T-D (Theater-Dimensional)

In this mode, you can enjoy a virtual playback of multichannel surround sound

even with only two or three speakers. This works by controlling how sounds

reach the listener’s left and right ears.

• This mode cannot be selected when "Speaker Virtualizer" ( p75) is set to

"Off" (Default: On).

 TV Logic

Suitable for TV shows produced in a TV studio. This mode gives clarity to voices

by enhancing the entire surround sounds, and creates a realistic acoustic image.

 Unplugged

Suitable for acoustic instruments, vocals and jazz. This mode emphasizes the

front sound eld image, giving the impression of being in front of the stage.

I have connected my Onkyo receiver to my projector thru the HDMI out but have received the message "signal out of reach". My TV which is close to the av receiver works ok when using the HDMI out. The projector is on the ceiling in line with the ceiling speakers and they work Ok when the tv is used,
How do I correct this? Submitted on 6-1-2024 at 06:37
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR494 in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR494

Onkyo TX-SR494 User Manual - German - 102 pages

Onkyo TX-SR494 User Manual - Dutch - 101 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Onkyo TX-SR494 Manual

Product: