492645
55
Zoom out
Zoom in
Previous page
1/68
Next page
Appendix
En-55
Only the front speakers produce sound
Only the center speaker produces sound
The surround speakers produce no sound
The center speaker produces no sound
The subwoofer produces no sound
There’s no sound with a certain signal format
Can’t get 5.1 playback
The speaker volume cannot be set as required
Noise can be heard
The Late Night function doesn’t work
About DTS signals
The beginning of audio received by an HDMI IN
can’t be heard
If the input signal format is set to “PCM” or “DTS”.
Set it to “Off”.
44
When the Stereo or Mono listening mode is selected,
only the front speakers and subwoofer produce
sound.
31
Check the Speaker Configuration. 40
If you use the Dolby Pro Logic II Movie, Dolby Pro
Logic II Music, or Dolby Pro Logic II Game listening
mode with a mono source, such as an AM radio
station or mono TV program, the sound is
concentrated in the center speaker.
Make sure the speakers are configured correctly. 40
When the T-D (Theater-Dimensional), Stereo or
Mono listening mode is selected, the surround
speakers produce no sound.
Depending on the source and current listening mode,
not much sound may be produced by the surround
speakers. Try selecting another listening mode.
28
Make sure the speakers are configured correctly. 40
When the Stereo or Mono listening mode is selected,
the center speaker produces no sound.
Make sure the speakers are configured correctly. 40
The subwoofer outputs no sound while only Speakers
B is on. Turn on Speakers A.
33
When you play source material that contains no
information in the LFE channel, the subwoofer
produces no sound.
Make sure the speakers are configured correctly. 40
Check the digital audio output setting on the
connected device. On some game consoles, such as
those that support DVD, the default setting is off.
With some DVD-Video discs, you need to select an
audio output format from a menu.
Depending on the input signal, some listening modes
cannot be selected.
29-30
When Speaker B is turned on, Speakers A is reduced
to 2.1-channel playback.
33
Depending on the number of connected speakers, it is
not always possible to select all of the listening
modes.
29-30
After the volume level of each individual speaker has
been adjusted, the maximum volume may be reduced.
41
Using cable ties to bundle audio cables with power
cords, speaker cables, and the like may degrade the
audio performance, so refrain from doing it.
An audio cable may be picking up interference. Try
repositioning your cables.
Make sure the source material is Dolby Digital,
Dolby Digital Plus, or Dolby TrueHD.
47
When DTS program material ends and the DTS
bitstream stops, the AV receiver remains in DTS
listening mode and the dts indicator remains on. This
is to prevent noise when you use the pause, fast
forward, or fast reverse function on your player. If
you switch your player from DTS to PCM, because
the AV receiver does not switch formats
immediately, you may not hear any sound, in which
case you should stop your player for about three
seconds, and then resume playback.
With some CD and LD players, you won’t be able to
playback DTS material properly even though your
player is connected to a digital input on the AV
receiver. This is usually because the DTS bitstream
has been processed (e.g., output level, sampling rate,
or frequency response changed) and the AV receiver
doesn’t recognize it as a genuine DTS signal. In such
cases, you may hear noise.
Playing DTS program material, using the pause, fast
forward, or fast reverse function on your player may
produce a short audible noise. This is not a
malfunction.
Since it takes longer to identify the format of an
HDMI signal than it does for other digital audio
signals, audio output may not start immediately.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR313 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR313 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR313

Onkyo TX-SR313 Quick start guide - English - 4 pages

Onkyo TX-SR313 Quick start guide - German - 4 pages

Onkyo TX-SR313 User Manual - German - 68 pages

Onkyo TX-SR313 Quick start guide - Dutch - 4 pages

Onkyo TX-SR313 User Manual - Dutch - 68 pages

Onkyo TX-SR313 Quick start guide - French - 4 pages

Onkyo TX-SR313 User Manual - French - 68 pages

Onkyo TX-SR313 Quick start guide - Italian - 4 pages

Onkyo TX-SR313 User Manual - Italian - 68 pages

Onkyo TX-SR313 Quick start guide - Swedish - 4 pages

Onkyo TX-SR313 User Manual - Swedish - 68 pages

Onkyo TX-SR313 Quick start guide - Spanish - 4 pages

Onkyo TX-SR313 User Manual - Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info