632469
33
Zoom out
Zoom in
Previous page
1/52
Next page
33
En
Note
•If
On is selected and the signal can be output by the TV, the
AV receiver will output no sound through its speakers.
•IfOn” is selected, “TV Sp On” appears on the display by
pressing DISPLAY.
•When
TV Control is set to On, this setting is fixed to
Auto.
With some TVs and input signals, no sound may be output even
when this setting is set to
On.
•When theAudio TV OUT” setting is set to
On, or TV Con-
trol” is set to
On and you’re listening through your TV’s
speakers ( 14), if you turn up the AV receiver’s volume con-
trol, the sound will be output by the AV receiver’s front left and
right speakers. To stop the AV receiver’s speakers producing
sound, change the settings, change your TV’s settings, or turn
down the AV receiver’s volume.
LipSync
` Disable
:
HDMI lip sync disabled.
` Enable:
HDMI lip sync enabled.
The AV receiver can be set to automatically correct any
delay between the video and the audio, based on the data
from the connected monitor.
Note
This function works only if your HDMI-compatible TV supports
HDMI Lip Sync.
You can check the amount of delay being applied by the HDMI
Lip Sync function on the A/V Sync screen.
HDMI Control (RIHD)
` Off
:
p disabled.
` On:
p enabled.
This function allows
p-compatible components
connected via HDMI to be controlled with the AV receiver
( 49 to 51).
Note
When set to “On” and close the menu, the name of connected
p-compatible components and “RIHD On” are dis-
played on the AV receiver.
Search…(name)RIHD On
When the AV receiver cannot receive the name of the compo-
nent, it is displayed as “Player
*
” or “Recorder
*
”, etc (“
*
” means
the number of two or more component).
When set to “Off” and close the menu, “RIHD Off” are dis-
played on the AV receiver.
DisconnectRIHD Off
•When an p-compatible component is connected to the
AV receiver via the HDMI cable, the name of the connected
component is displayed on the AV receiver display. For example,
while you are watching TV broadcasting, if you operate a
Blu-ray Disc/DVD player (being powered on) by the remote
control of the AV receiver, the name of the Blu-ray Disc/DVD
player is displayed on the AV receiver.
•Set to
Off when a connected piece of equipment is not com-
patible or it is unclear whether the equipment is compatible or
not.
If movement is unnatural when set to
On, change the setting
to
Off.
Refer to the connected component’s instruction manual for
details.
Audio Return Ch (ARC)
` Off:
Select “Off” if you don’t want to use audio return
channel (ARC) function.
` Auto
:
The audio signal from your TV tuner can be sent to
the HDMI OUT of the AV receiver.
Audio return channel (ARC) function enables an HDMI
1.4 capable TV to send the audio stream to the HDMI
OUT of the AV receiver. To use this function, you must
select the TV/CD input selector and your TV must support
ARC function.
Note
•TheAudio Return Ch setting can be set only when the above
HDMI Control setting is set to “On”.
This setting is set to “Autoautomatically when the above
HDMI Control is set to “On” first time.
Power Control
` Off:
Power Control disabled.
` On
:
Power Control enabled.
To link the power functions of p-compatible com-
ponents connected via HDMI, select “On”.
This setting is set to “On” automatically when the above
HDMI Control” is set to “On” first time.
Note
•The
Power Control setting can be set only when the above
HDMI Control setting is set to On”.
HDMI power control only works with p-compatible
components that support it and may not work properly with
some components due to their settings or compatibility.
When set to “On”, power consumption will increase.
When set to “On”, regardless of whether the AV receiver is On
or in Standby, both audio and video stream from an HDMI input
will be output to the TV or other components via HDMI connec-
tion (HDMI pass through function). When the HDMI pass
through function activates in standby mode, HDMI THRU indi-
cator will light.
The power consumption during standby mode will increase dur-
ing the HDMI pass through function; however in the following
cases, the power consumption can be saved:
1. The TV is in standby mode.
2. You are watching a TV program.
Refer to the connected component’s instruction manual for
details.
TV Control
` Off:
TV Control disabled.
` On
:
TV Control enabled.
Set to “On” when you want to control the AV receiver
from an p-compatible TV that is connected to
HDMI.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR308 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR308 in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR308

Onkyo TX-SR308 User Manual - German - 104 pages

Onkyo TX-SR308 User Manual - Dutch - 104 pages

Onkyo TX-SR308 User Manual - French - 104 pages

Onkyo TX-SR308 User Manual - Italian - 104 pages

Onkyo TX-SR308 User Manual - Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info