62082
66
Zoom out
Zoom in
Previous page
1/72
Next page
66
Troubleshooting
—Continued
Make sure the speakers are configured correctly
(page 56).
The center speaker produces no sound
When the Stereo or Mono listening mode is selected,
the center speaker produces no sound (page 50).
Make sure the speakers are configured correctly
(page 56).
The surround back speakers produce no sound
While speaker set B is on, speaker set A is reduced to
5.1-channel playback and the surround back speakers
produce no sound.
The surround back speakers are not used with all lis-
tening modes. Select another listening mode
(page 50).
Not much sound may be produced by the surround
back speakers with some sources.
Make sure the speakers are configured correctly
(page 56).
The subwoofer produces no sound
The subwoofer outputs no sound while only speaker
set B is on. Turn on speaker set A.
When you play source material that contains no infor-
mation in the LFE channel, the subwoofer produces
no sound.
Make sure the speakers are configured correctly
(page 56).
Speaker set B produces no sound
Speaker set B only outputs sources that are connected
to an analog input. Make sure that the analog audio
cables are connected properly.
There’s no sound with a certain signal format
Check the digital audio output setting on the con-
nected device. On some games consoles, such as those
that can play DVDs, the default setting is off.
•With some DVD-Video discs, you need to select an
audio output format from a menu.
Can’t get 6.1- or 7.1-channel playback
While speaker set B is on, speaker set A is reduced to
5.1-channel playback.
The volume cannot be set to 79
When the volume level of each speaker has been
adjusted (pages 47, 59), the maximum possible vol-
ume may be reduced.
Noise can be heard
Using cable ties to bundle audio cables with power
cords, speaker cables, and so on may degrade the
audio performance, so don’t do it.
An audio cable may be picking up interference. Try
repositioning your cables.
The Late Night function doesn’t work
Make sure the source material is Dolby Digital
(page 52).
The multichannel DVD input doesn’t work
Check the multichannel DVD input connections
(page 26).
•To select the multichannel DVD input, press the
[MULTI CH] input selector button.
Check the audio output settings on your DVD player.
About DTS signals
When playing DTS program material, using the pause,
fast forward, or fast reverse function on your player
may produce a short audible noise. This is not a mal-
function.
When DTS program material ends and the DTS bit-
stream stops, the AV receiver remains in DTS listen-
ing mode and the DTS indicator remains on. This is to
prevent noise when you use the pause, fast forward, or
fast reverse function on your player. If you switch your
player from DTS to PCM, because the AV receiver
does not switch formats immediately, you may not
hear any sound, in which case you should stop your
player for about 3 seconds, and then resume playback.
•With some CD players, you won’t be able to playback
DTS material properly even though your player is con-
nected to a digital input on the AV receiver. This is
usually because the DTS bitstream has been processed
(e.g., output level, sampling rate, or frequency
response changed) and the AV receiver doesn’t recog-
nize it as a genuine DTS signal. In such cases, you
may hear noise.
There’s no picture
Make sure that all video connecting plugs are pushed
in all the way (page 22).
Make sure that each video component is properly con-
nected.
For TX-SR505/TX-SR505E/TX-SR8550:
The AV
receiver does not convert between formats, so if a
video source component is connected to a component
video input, your TV must be connected to the compo-
nent video output (page 23).
For TX-SR575:
If your video component is con-
nected to a component video input, your TV must be
connected to the component video output (page 23)
For TX-SR505 North American model/
TX-SR505E/TX-SR575:
If a video component is
connected to an HDMI input, your TV must be con-
nected to the HDMI OUT (page 27).
On your TV, make sure that the video input to which
the AV receiver is connected is selected.
Video
TX-SR505_En.book Page 66 Tuesday, January 30, 2007 11:53 AM
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-SR 505 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-SR 505 E in the language / languages: English as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-SR 505 E

Onkyo TX-SR 505 E User Manual - German - 136 pages

Onkyo TX-SR 505 E User Manual - Dutch - 136 pages

Onkyo TX-SR 505 E User Manual - Italian - 136 pages

Onkyo TX-SR 505 E User Manual - Swedish - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info