601862
19
Zoom out
Zoom in
Previous page
1/142
Next page
Step 3:
Playing Back
En-19
AM/FM frequency step setting
It may be necessary for you to change the frequency
step to tune the radio in your area. Change the step
with the following procedure. Note that when this
setting is changed, all radio presets are deleted.
1 After pressing RCV on the remote controller,
press SETUP.
2. Select "6. Hardware" with the cursor and press
ENTER.
3. Select "Tuner" with the cursor and press ENTER.
4. Select "AM/FM Frequency Step" (North American
models) or "AM Frequency Step" (European,
Australian and Asian models) with the cursor
and select the frequency step for your area.
6
Multi-zone
You can listen to audio in a room (called Zone 2 or Zone
3) other than the one where this unit is located (called the
main room). You can also output video and audio to a TV in
the separate room (Zone 2) via HDMI.
Sources you can playback
External players (
1)
NET (
2)
BLUETOOTH
AM/FM Radio
1 In Zone 2, you can play equipment connected to any of the HDMI
IN1 to IN5 jacks, DIGITAL IN COAXIAL/OPTICAL jacks, or AUDIO
IN jacks. Note that only analog or 2-channel PCM audio signals can
be played and that some players require audio output setting. Only
players connected to the AUDIO IN jack by analog connection can
be played in Zone 3.
2 DSD and Dolby TrueHD audio cannot be played in Zone 2/Zone 3.
Making Multi-zone Connection
There are the following three methods of connection.
Simultaneous playback in all zones is also possible.
a. Connecting a TV in a separate room
b. Connecting with an integrated amplifier or power
amplifier in a separate room
c. Connecting with speakers in a separate room
a. Connecting a TV in a separate room
You can play video and audio of the HDMI connected
player on the TV in a separate room. With an HDMI cable,
connect between the HDMI OUT SUB/ZONE 2 jack of the
unit and the HDMI IN jack of the TV in a separate room.
Main room
Zone 2
Settings are required: Press RCV and then
SETUP on the remote controller, select "1. Input/
Output Assign" - "TV Out" and set the "Zone 2
HDMI" setting to "Use".
The information for a connected device can
be displayed on the TV screen in a separate
room. Press the ZONE2 button on the remote
controller to select Zone 2 and press DISPLAY.
Adjust the volume on the TV in the separate
room.
b. Connecting with an integrated amplifier or
power amplifier in a separate room
It is possible to play 2 ch source in a separate room while
7.1 ch source is being played in the main room.
Connect the PRE/LINE OUT ZONE2 jacks or LINE OUT
ZONE3 jacks of the unit and the line-in jacks of the
integrated amplifier in a separate room with an RCA cable.
Settings are required to listen to HDMI input
audio in Zone 2: Press RCV and then SETUP
on the remote controller, select "1. Input/Output
Assign" - "TV Out" and set the "Zone 2 HDMI"
setting to "Use".
Zone 2
Main room
Zone 3
Zone 2 audio can be adjusted with both the unit and the
pre-main amplifier used in the separate room. Zone 3 audio
should be adjusted with the pre-main amplifier used in the
separate room.
Settings are required to adjust audio in Zone
2 using this unit: Press RCV and then SETUP
on the remote controller, select "3. Audio Adjust"
- "Multi Zone" and set the "Zone 2 Out" setting
to "Variable". Be sure to make this setting if you
connect a power amplifier. If you do not, the volume
output may be big enough to cause damage.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-RZ900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-RZ900 in the language / languages: English as an attachment in your email.

The manual is 5,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-RZ900

Onkyo TX-RZ900 User Manual - German, Dutch - 140 pages

Onkyo TX-RZ900 User Manual - French - 56 pages

Onkyo TX-RZ900 User Manual - Italian, Swedish - 140 pages

Onkyo TX-RZ900 User Manual - Spanish - 56 pages

Onkyo TX-RZ900 User Manual - Finnish - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info