601862
10
Zoom out
Zoom in
Previous page
1/142
Next page
Step 1:
Connections
En-10
Control) compliant device, connection with ARC compatible
TV, and HDMI Standby Through function. See "2 Source
Connection" of "Step 2: Initial Setup".
Another TV can be connected to the HDMI OUT
SUB jack. In this case, press the HDMI OUT button
on the main unit several times to display "SUB" or
"MAIN+SUB" and select the output method. You have to
modify the settings to enable the CEC functions, such
as ARC, for the TV connected to the HDMI OUT SUB
jack. Set "Step 3: Playing Back" - "7 Quick Setup menu"
- "Control TV" to "SUB".
To enjoy HDCP2.2 protected video, connect the player
to one of the HDMI IN1 to IN5 jacks and connect
the HDMI output jack on this unit and to a HDCP2.2
compatible HDMI input jack on the TV. You will be
unable to view images protected by HDCP2.2 if your TV
does not have a HDCP2.2 compatible input jack.
To play 4K or 1080p video, use a high speed HDMI
cable or high speed HDMI with Ethernet cable.
Connecting Components without HDMI
If your AV component does not have HDMI jack, use an
available jack of your component for cable connection with
this unit.
It is possible to change assignment of the input jacks and input selector
buttons. For how to make settings, see "1. Input/Output Assign" in
"Advanced Settings (Setup Menu)" in the Advanced Manual.
4
321
5
Video signal connection
The unit has a video upconversion function. For details,
see the next section.
1
A TV with component video input jacks or a player with
component video output jacks can be connected.
Only images input through the COMPONENT VIDEO IN jacks can be
output through the COMPONENT VIDEO OUT jacks.
Component video cable
Its transmitted video has higher quality than
that of composite video cable.
2
A TV with composite video input jacks or a player with
composite video output jacks can be connected.
Only images input through the VIDEO IN jack (composite) can be
output through the VIDEO OUT jack.
Composite video cable
Audio signal connection
3
A player with a digital audio out jack can be connected.
Digital optical cable (OPTICAL)
The DIGITAL IN OPTICAL jack of the unit has
a cover. Push in the cable against the cover
as it is turned inside.
Digital coaxial cable (COAXIAL)
4
A player with analog audio out jacks can be connected.
When using jacks
1
and
2
for video input, connect
to the audio input jacks corresponding to the jacks
connected at
1
and
2
. (For example, when video input
connection is to the
1
BD/DVD jack, the audio input
connection should also be to the
4
BD/DVD jacks.)
Analog audio (RCA) cable
5
Connect a turntable that uses an MM type cartridge
and does not have a built-in audio equalizer. If the
connected turntable has a built-in audio equalizer,
connect it to the
4
analog audio input jack.
If it uses an MC type cartridge, install an audio equalizer compatible
with MC type cartridge between the unit and the turntable by
connecting it to the
4
analog audio input jack. For details, refer to
the turntable's instruction manual.
If the turntable has a ground wire, connect it to the GND terminal of
this unit. If connecting the ground wire increases noise, disconnect it.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-RZ900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-RZ900 in the language / languages: English as an attachment in your email.

The manual is 5,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-RZ900

Onkyo TX-RZ900 User Manual - German, Dutch - 140 pages

Onkyo TX-RZ900 User Manual - French - 56 pages

Onkyo TX-RZ900 User Manual - Italian, Swedish - 140 pages

Onkyo TX-RZ900 User Manual - Spanish - 56 pages

Onkyo TX-RZ900 User Manual - Finnish - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info