686251
178
Zoom out
Zoom in
Previous page
1/202
Next page
178
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
of lossy compressed les such as MP3 will be improved. The setting can be set
for each input. This works in signals whose sampling frequencies are 48 kHz or
less. The setting is not effective in the bitstream signals.
It cannot be set if the listening mode is Pure Audio or Direct.
Late Night: Enable small sounds to be easily heard in detail. It is useful when
you need to reduce the volume while watching a movie late night. You can enjoy
the effect only when playing the Dolby series and DTS series input signals.
This function cannot be used in the following cases.
When playing Dolby Digital Plus or Dolby TrueHD with "Loudness
Management" set to "Off"
When the input signal is DTS:X, and "Dialog Control" is not 0 dB
Stereo Assign: When the listening mode is set to "Stereo", the audio output
destination can be set to "Surround", "Surround Back", "Height 1" or "Height 2" in
addition to the normal right and left channels ("Front") of front speakers.
This function cannot be used if the listening mode is set to modes other than
"Stereo".
You cannot select speakers that are not set with "2. Speaker" - "Conguration"
on the Setup menu.
Zone B: Select a method of outputting audio to ZONE B from among "Off",
"On(A+B)" and "On(B)".
In the following cases, "Zone B" cannot be selected.
When ZONE 2 is On
When "2. Speaker" - "Conguration" - "Zone 2 Preout" on the Setup menu
is set to "Zone 2" (
p158)
AccuEQ
AccuEQ: Enable or disable the equalizer function that corrects for sound
distortion caused by the acoustic environment of the room. To enable this setting,
normally select "On (All Ch)", and to disable only the front speakers, select "On
(ex. L/R)". The setting can be set for each input.
Manual Equalizer: Select "Preset 1" to "Preset 3" congured in "2. Speaker"
- "Equalizer Settings" on the Setup menu. When this is set to "Off", the same
sound eld setting is applied to all ranges.
Re-EQ, Re-EQ(THX): Adjusts the soundtrack with the enhanced high range so
that it suits a home theater.
The following listening modes can be used for Re-EQ: Dolby Audio - DD, Dolby
Audio - DD+, Dolby Audio - Surr, Dolby Audio - TrueHD, Multichannel, DTS, DTS-
ES, DTS 96/24, DTS-HD High Resolution Audio, DTS-HD Master Audio, DTS
Neural:X, DTS Express and DSD
In Re-EQ(THX), the following listening modes can be used: THX Cinema and
THX Select Cinema.
It cannot be set if the listening mode is Pure Audio or Direct.
EQ for Standing Wave : Setting this "On" will control the effect of the standing
wave generated by the sound wave reected by wall or similar interfering with the
original sound wave.
Level
Front: Adjust the speaker level of the front speakers while listening to the sound.
Center : Adjust the speaker level of the center speaker while listening to the
sound.
Subwoofer: Adjust the speaker level of the subwoofer while listening to the
sound.
If you set the unit to the standby mode, the adjustments you made will be
restored to the previous statuses.
178


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-RZ840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-RZ840 in the language / languages: English as an attachment in your email.

The manual is 15,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-RZ840

Onkyo TX-RZ840 User Manual - German - 204 pages

Onkyo TX-RZ840 User Manual - Dutch - 202 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info