601863
86
Zoom out
Zoom in
Previous page
1/142
Next page
Advanced Settings (Setup Menu)
En-50
Setting Item Default Value Setting Details
Audio TV Out (SUB) Off You can enjoy audio through the speakers of the
HDMI connected TV while this unit is on.
"On": Use this function
"Off": Do not use this function
The setting is fixed to "Auto" if "HDMI CEC
(RIHD)" is set to "On" and "Control TV" is set
to "SUB".
Listening mode cannot be changed while
"Audio TV Out (SUB)" is set to "On" and
audio is being output through the speakers
of the TV.
Depending on your TV set or input signal of
the component, audio may not output through
the speakers of the TV even if this setting
is set to "On". In such case, audio is output
from the speakers of the unit.
If you operate the MASTER VOLUME control
on the unit when audio input to the unit is
being output from the TV speakers, audio will
be output from the unit. If you do not want to
output audio from the unit, change the unit or
TV settings, or reduce the volume of the unit.
This setting is fixed to "Off" if "TV Out" -
"HDMI Out" is set to "MAIN".
Audio Return
Channel
Auto () You can enjoy sound of the HDMI connected
ARC compatible TV through the speakers
connected to the unit.
To use this function, set "HDMI CEC (RIHD)"
to "On" in advance.
"Auto": When enjoying the TV sound through the
speakers connected to the unit
"Off": When not using the ARC function
Auto LipSync On This setting automatically corrects any
desynchronization between the video and audio
signals based on data from the HDMI LipSync
compatible TV.
"On": Automatic correction will be enabled.
"Off": Automatic correction will be disabled.
Power Management
Setting Item Default Value Setting Details
Sleep Timer Off Select to turn the unit into standby mode
automatically when the specified time elapses.
Select a value between "10 minutes" to "90
minutes".
"Off": Select if you do not want the unit to
automatically switch to standby.
Auto Standby On/Off This setting places the unit on standby
automatically after 20 minutes of inactivity
without any video or audio input.
"On": The unit will automatically enter standby
mode.
"Off": The unit will not automatically enter
standby mode.
"Auto Standby" is appeared on the display
and TV screen 30 seconds before the Auto
Standby comes on.
"Auto Standby" does not work when Zone
2 is on.
Default values vary depending on the
regions.
Auto Standby in
HDMI Standby
Through
Off Enable or disable "Auto Standby" while "HDMI
Standby Through" is on.
"On": The setting will be enabled.
"Off": The setting will be disabled.
This setting cannot be set to "On" if "Auto
Standby" is set to "Off".
USB Power Out at
Standby
Off When this function is "On", you can still have
equipment connected to the USB port supplied
with power even when this unit is in standby.
When this function is being used, the power
consumption increases even when the unit
is on standby. However, the increase in
power consumption is kept to a minimum
by automatically entering the HYBRID
STANDBY mode, where only the essential
circuit is operating.
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-RZ800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-RZ800 in the language / languages: English as an attachment in your email.

The manual is 5,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-RZ800

Onkyo TX-RZ800 User Manual - German, Dutch - 140 pages

Onkyo TX-RZ800 User Manual - French - 56 pages

Onkyo TX-RZ800 User Manual - Italian, Swedish - 140 pages

Onkyo TX-RZ800 User Manual - Spanish - 56 pages

Onkyo TX-RZ800 User Manual - Finnish - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info