601863

Onkyo TX-RZ800 Manual

77
Zoom out
Zoom in
Previous page
1/142
Next page
Advanced Settings (Setup Menu)
En-41
● Default values vary depending on the regions.
● The speaker "Distance" may be unable to be changed depending on the settings in "Configuration" -
"Speaker Channels" / "Subwoofer".
Level Calibration
Adjust the level of each speaker with the built-in test tone. Settings are automatically
configured if you use the Automatic Speaker Setup.
Setting Item Default Value Setting Details
Front Left 0.0dB Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
Center 0.0dB Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
Front Right 0.0dB Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
Height Left 0.0dB Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
● This cannot be selected in the following
conditions.
– The setting for "Configuration" - "Bi-Amp"
is "Yes"
– "Configuration" - "Powered Zone 2" is set
to "Yes" and ZONE 2 is on
Height Right 0.0dB Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
● This cannot be selected in the following
conditions.
– The setting for "Configuration" - "Bi-Amp"
is "Yes"
– "Configuration" - "Powered Zone 2" is set
to "Yes" and ZONE 2 is on
Setting Item Default Value Setting Details
Surround Right 0.0dB Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
Back Right 0.0dB Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
● This cannot be selected in the following
conditions.
– The setting for "Configuration" - "Bi-Amp"
is "Yes"
– "Configuration" - "Powered Zone 2" is set
to "Yes" and ZONE 2 is on
Back Left 0.0dB Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
● This cannot be selected in the following
conditions.
– The setting for "Configuration" - "Bi-Amp"
is "Yes"
– "Configuration" - "Powered Zone 2" is set
to "Yes" and ZONE 2 is on
Surround Left 0.0dB Select a value between "-12.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
Subwoofer 0.0dB Select a value between "-15.0 dB" and "+12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select
the desired level.
● The speaker "Level Calibration" may be unable to be changed depending on the settings in
"Configuration" - "Speaker Channels" / "Subwoofer".
● "Level Calibration" cannot be changed while muting is on.
… 77 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-RZ800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-RZ800 in the language / languages: English as an attachment in your email.

The manual is 5,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-RZ800

Onkyo TX-RZ800 User Manual - German, Dutch - 140 pages

Onkyo TX-RZ800 User Manual - French - 56 pages

Onkyo TX-RZ800 User Manual - Italian, Swedish - 140 pages

Onkyo TX-RZ800 User Manual - Spanish - 56 pages

Onkyo TX-RZ800 User Manual - Finnish - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info