601863
69
Zoom out
Zoom in
Previous page
1/142
Next page
Using the Listening Modes
En-33
THX button
You can select a THX listening mode.
Input Format Listening Mode
All formats other than
Dolby Atmos and DTS:X
THX Cinema
1
THX Music
1
THX Games
1
THX S2 Cinema
2
THX S2 Music
2
THX S2 Games
2
THX Surr EX
2
1
Surround speakers need to be installed.
2
Back speakers need to be installed. Can be selected when the input
format is 5.1 ch.
PURE AUDIO button (on the main unit only)
The display and analog video circuit are turned off to switch
the unit to Pure Audio mode which provides purer sound.
Selecting this mode lights the PURE AUDIO indicator on
the unit. Pressing the button again reselects the previous
listening mode.
Selecting Pure Audio for listening mode turns off the
display and analog video circuitry, but the video signals
input through HDMI input are output from HDMI output.
Pure Analog Playback (on the main unit only)
If you connect a CD player or such other player to the
AUDIO IN jacks of the unit with analog audio (RCA) cable,
you can use the "Pure Analog Playback function" that
physically shuts down the digital circuits affecting sound
reproduction and enables cleaner sound playback. If
this function is on, the power of the analog video circuit,
HDMI circuit, digital audio circuit, and tuner circuit is cut
off and their interference with sound playback is physically
prevented.
To use the function, hold down PURE AUDIO on the main
unit 5 seconds during playback. When "Pure Analog
[Enter] OK" appears on the main unit display, press ENTER
on the main unit. To turn off the function, press
ON/STANDBY on the main unit.
When the function is on, you can perform only input
selection and volume adjustment. It cannot be operated
with Onkyo Remote or any other application that can
control the unit.
It cannot be used when "TUNER", "NET", or
"BLUETOOTH" input is selected or the multi-zone
function is on.
The Auto Standby setting becomes off if the function is
on.
Checking the Input Format
While audio from the player is being input, press DISPLAY
on the remote controller several times to switch the
information shown on the main unit display. For example, if
"Dolby D 5.1" is displayed, the Dolby Digital 5.1 ch signals
are being input.
The number of channels is not displayed when the input
signal is "Dolby Atmos" format.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-RZ800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-RZ800 in the language / languages: English as an attachment in your email.

The manual is 5,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-RZ800

Onkyo TX-RZ800 User Manual - German, Dutch - 140 pages

Onkyo TX-RZ800 User Manual - French - 56 pages

Onkyo TX-RZ800 User Manual - Italian, Swedish - 140 pages

Onkyo TX-RZ800 User Manual - Spanish - 56 pages

Onkyo TX-RZ800 User Manual - Finnish - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info