686252
8
Zoom out
Zoom in
Previous page
1/201
Next page
8
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
4. Press ON/STANDBY on the main unit to turn the unit into standby mode.
The process is completed, and your rmware is updated to the latest version.
Do not use on the remote controller.
If an Error Message is Displayed
If an error occurs, "- Error!" is displayed on the display of the unit. (""
represents an alphanumeric character.) Refer to the following descriptions and
check.
Error Code
-01, -10:
LAN cable not found. Connect the LAN cable properly.
-02, -03, -04, -05, -06, -11, -13, -14, -16, -17, -18, -20,
-21:
Internet connection error. Check the following:
Whether the router is turned on
Whether this unit and the router are connected via the network
Unplug and plug the power cords of this unit and the router. This may solve
the problem. If you are still unable to connect to the Internet, the DNS server
or proxy server may be temporarily down. Check the server operation status
with your Internet service provider.
Others:
After removing the power plug once, insert it to the outlet, and then start the
operation from the beginning.
Updating via USB
While updating the rmware, do not do the following:
Disconnecting and reconnecting cables, USB storage device, speaker
setup microphone or headphones, or performing operations on the unit
such as turning the power off
Accessing this unit from a PC or smartphone using their applications
Prepare a 256 MB or larger USB storage device. The format of USB storage
devices supports FAT16 or FAT32 le system format.
Media inserted into a USB card reader may not be used for this function.
USB storage devices equipped with the security function are not supported.
USB hubs and USB devices equipped with the hub function are not
supported. Do not connect these devices to the unit.
Delete any data stored on the USB storage device.
Turn off control devices (PC etc.) connected to the network.
Stop an Internet radio, USB storage device, or server content being played
If the multi-zone function is active, turn it off.
If "HDMI CEC" is set to "On", set it to "Off".
Press
. Next, select "5. Hardware" - "HDMI" and press ENTER, then
select "HDMI CEC" and select "Off".
* Depending on the USB storage device or its content, long time may be required
for loading, the content may not be loaded correctly, or power may not be supplied
correctly.
* Our company will not be liable whatsoever for any loss or damage of data, or storage
failure arising from the use of the USB storage device. Please note this in advance.
* The descriptions may differ from the actual on-screen displays, however, operations
and functions are the same.
Update
1. Connect the USB storage device to your PC.
2. Download the rmware le from the our company's website to your PC and
unzip.
Firmware les are named as below.
ONKAVR_R.zip
Unzip the le on your PC. The number of unzipped les and folders varies
depending on the model.
3. Copy all unzipped les and folders to the root folder of the USB storage
device.
Make sure to copy the unzipped les.
4. Connect the USB storage device to the USB port of this unit.
If an AC adapter is supplied with the USB storage device, connect the AC
adapter, and use it with a household outlet.
If the USB storage device has been partitioned, each section will be treated
as an independent device.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-RZ740 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-RZ740 in the language / languages: English as an attachment in your email.

The manual is 16,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-RZ740

Onkyo TX-RZ740 User Manual - German - 203 pages

Onkyo TX-RZ740 User Manual - Dutch - 201 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info