645300
52
Zoom out
Zoom in
Previous page
1/110
Next page
16
> Specifications > Settings > Listening Modes > Playback Function > Basic Manual
Troubleshooting | Appendix
Setting item Default Value Setting Details
BGC Off If your listening room layout (for practical or
aesthetic reasons) locates most of the listeners
close to the rear wall, the resulting bass level can
be sufficiently reinforced by the boundary that the
overall sound becomes "boomy". THX Select2 Plus
receivers contain a Boundary Gain Compensation
(BGC) feature to improve bass balance.
"On": Use this function
"Off": Do not use this function
In the following cases, the setting cannot be
changed:
"Configulation" - "Subwoofer" is set to "No".
"THX Ultra2 / Select2 Subwoofer" is set to
"No".
Loudness Plus On When the setting is set to "On", it is possible to
enjoy even subtle nuances of audio expression at
low volume. This is only available when the THX
listening mode is selected.
THX Loudness Plus
THX Loudness Plus is a new volume control
technology featured in THX Ultra2 Plus™ and THX
Select2 Plus™ Certified receivers.
With THX Loudness Plus, home theater audiences
can now experience the rich details in a surround
mix at any volume level.
A consequence of turning the volume below
Reference Level is that certain sound elements
can be lost or perceived differently by the listener.
THX Loudness Plus compensates for the tonal
and spatial shifts that occur when the volume
is reduced by intelligently adjusting ambient
surround channel levels and frequency response.
This enables users experience the true impact
of soundtracks regardless of the volume setting.
THX Loudness Plus is automatically applied when
listening in any THX listening mode. The new THX
Cinema, THX Music, and THX Games modes are
tailored to apply the proper THX Loudness Plus
settings for each type of content.
8� EQ for Standing Wave
This controls the affect of the standing waves that occur when sound waves reverberating
off obstacles such as walls interfere with the original sound waves.
Setting Item Default Value Setting Details
Filter 1-3 0.0 dB 1. After selecting the Filter to adjust from "Filter 1"
to "Filter 3" with
/ , press ENTER.
2. Select the frequency with
/
, then adjust
the attenuation with / . The frequency can
be selected between "63 Hz" and "250 Hz".
Attenuation can be selected between "0.0 dB"
and "12.0 dB" (0.5 dB intervals).
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-RZ1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-RZ1100 in the language / languages: English as an attachment in your email.

The manual is 5,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-RZ1100

Onkyo TX-RZ1100 User Manual - German, Dutch - 140 pages

Onkyo TX-RZ1100 User Manual - French - 72 pages

Onkyo TX-RZ1100 User Manual - Italian, Swedish - 140 pages

Onkyo TX-RZ1100 User Manual - Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info