549875
42
Zoom out
Zoom in
Previous page
1/94
Next page
Advanced Settings
42
Setting Item Default Value Setting Details
Auto Reconnect On This function automatically reconnects to the
Bluetooth-enabled device connected last when
you change the input selector to "BLUETOOTH".
"On": Use this function
"Off": Do not use this function
This function may not work depending on your
Bluetooth-enabled device.
Wakeup via
Bluetooth
Off This function wakes up the unit on standby by
connecting a Bluetooth-enabled device.
"On": Use this function
"Off": Do not use this function
Setting to "On" increases the power
consumption even when the unit is on standby.
However, the increase in power consumption
is kept to a minimum by automatically entering
the HYBRID STANDBY mode, where only the
essential circuit is operating.
This setting is fixed to "Off" if "Direct Change"
is set to "Off".
Pairing Information When paring is performed, the information of
the previous pairing stored in this unit will be
initialized.
Pressing ENTER when "Clear" is displayed
initializes the pairing information stored in this
unit.
This function does not initialize the pairing
information on the Bluetooth-enabled device.
When pairing the unit again with the device,
be sure to clear the pairing information on
the Bluetooth-enabled device in advance.
For information on how to clear the pairing
information, refer to the Bluetooth-enabled
device's instruction manual.
Device Displays the name of the Bluetooth-enabled
device connected to the unit.
The name is not displayed when "Status" is
"Ready" and "Pairing".
Setting Item Default Value Setting Details
Status Displays the status of the Bluetooth-enabled
device connected to the unit.
"Ready": Not paired
"Pairing": Paired
"Connected": Successfully connected
Wait for a while if "Bluetooth" cannot be selected. It will appear when the network function is started
up.
Firmware Update
Setting Item Default Value Setting Details
Update Notice Enable Availability of a firmware update will be notified
via network.
"Enable": Notify updates
"Disable": Do not notify updates
Version The current firmware version will be displayed.
Update via NET Press ENTER to select when you want to update
the firmware via network.
You will not be able to select this setting if you
do not have Internet access or there is nothing
to update.
Update via USB Press ENTER to select when you want to update
the firmware via USB.
You will not be able to select this setting if
a USB storage device is not connected or
there is nothing to update in the USB storage
device.
Wait for a while if "Firmware Update" cannot be selected. It will appear when the network function is
started up.
Initial Setup
You can make the initial setup from the setup menu.
Wait for a while if "Initial Setup" cannot be selected. It will appear when the network
function is started up.
Setting is not possible if "Monitor Out" is set to "SUB".
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR838 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR838 in the language / languages: English as an attachment in your email.

The manual is 17,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR838

Onkyo TX-NR838 User Manual - English - 20 pages

Onkyo TX-NR838 User Manual - German - 122 pages

Onkyo TX-NR838 User Manual - German - 278 pages

Onkyo TX-NR838 User Manual - Dutch - 122 pages

Onkyo TX-NR838 User Manual - Dutch - 274 pages

Onkyo TX-NR838 User Manual - French - 46 pages

Onkyo TX-NR838 User Manual - Italian - 122 pages

Onkyo TX-NR838 User Manual - Italian - 114 pages

Onkyo TX-NR838 User Manual - Swedish - 122 pages

Onkyo TX-NR838 User Manual - Spanish - 46 pages

Onkyo TX-NR838 User Manual - Finnish - 122 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info