549875
28
Zoom out
Zoom in
Previous page
1/94
Next page
Advanced Settings
28
Setting Item Default Value Setting Details
Back 80Hz(THX) Select the crossover frequency from "40Hz" to
"200Hz" to start outputting bass frequencies for
each channel.
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
In the following cases, the setting will be set to
"None":
"Surround" is set to "None".
"Front Speakers Type" is set to "Bi-Amp".
"Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
"Full Band" cannot be set unless "Surround" is
set to "Full Band".
Back Channel 2ch Select the number of channels of the connected
surround back speaker.
"1ch": When one speaker is connected (Connect to
the BACK or HEIGHT L terminal)
"2ch": When two speakers are connected
The setting cannot be changed if "Back" is set to
"None".
Wide None Select the crossover frequency from "40Hz" to
"200Hz" to start outputting bass frequencies for
each channel.
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
In the following cases, the setting will be set to
"None":
"Surround" is set to "None".
"Front Speakers Type" is set to "Bi-Amp".
"Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
"Full Band" cannot be set unless "Front" is set to
"Full Band".
Setting Item Default Value Setting Details
Height None Select the crossover frequency from "40Hz" to
"200Hz" to start outputting bass frequencies for
each channel.
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
In the following cases, the setting will be set to
"None":
"Surround" is set to "None".
"Front Speakers Type" is set to "Bi-Amp".
"Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
"Full Band" cannot be set unless "Front" is set to
"Full Band".
LPF of LFE 120Hz Set the low-pass filter for LFE (low-frequency effect)
signals in order to pass lower frequency signals than
the set value and thus cancel unwanted noises. The
low-pass filter will be effective only on sources with
LFE channel.
Select a value between "80Hz" to "120Hz".
"Off": Do not use this function
Subwoofer Phase Switch the phase of subwoofer between "0°" and
"180°".
Double Bass ----- Boost bass output by feeding bass sounds from
the front left and right, and center speakers to the
subwoofer.
"On": Bass output will be boosted.
"Off(THX)": Bass output will not be boosted.
The setting will not automatically be configured
even if you performed the automatic speaker
setup.
If "Subwoofer" is set to "No" or if "Front" is set to
other than "Full Band", the setting will be fixed to
"-----".
If you're using THX-certified speakers, we recommend the following settings:
Set a value "80Hz(THX)" in Crossover frequency.
Set a value "80Hz(THX)" in LPF of LFE.
Set a value "Off(THX)" in Double Bass.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR838 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR838 in the language / languages: English as an attachment in your email.

The manual is 17,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR838

Onkyo TX-NR838 User Manual - English - 20 pages

Onkyo TX-NR838 User Manual - German - 122 pages

Onkyo TX-NR838 User Manual - German - 278 pages

Onkyo TX-NR838 User Manual - Dutch - 122 pages

Onkyo TX-NR838 User Manual - Dutch - 274 pages

Onkyo TX-NR838 User Manual - French - 46 pages

Onkyo TX-NR838 User Manual - Italian - 122 pages

Onkyo TX-NR838 User Manual - Italian - 114 pages

Onkyo TX-NR838 User Manual - Swedish - 122 pages

Onkyo TX-NR838 User Manual - Spanish - 46 pages

Onkyo TX-NR838 User Manual - Finnish - 122 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info