Manual Onkyo TX-NR808 (page 87 of 100) (English)

645307

Zoom out

Zoom in

1/100

Note

• The following buttons cannot learn new commands: REMOTE

MODE, ALL OFF, MY MOVIE, MY TV, MY MUSIC.

• The remote controller can learn approximately 70 to 90 com-

mands, although this will be less if commands that use a lot of

memory are learned.

• Remote controller buttons such as Play, Stop, Pause, and so on

are preprogrammed with commands for controlling Onkyo CD

players, cassette decks, and DVD players. However, they can

learn new commands, and you can restore the preprogrammed

commands at any time by resetting the remote controller (➔ 83).

• To overwrite a previously learned command, repeat this proce-

dure.

• Depending on the remote controller that you are using, there may

be some buttons that won’t work as expected, or even some

remotes that cannot be learned at all.

• Only commands from infrared remote controllers can be learned.

• When the remote controller’s batteries expire, all learned com-

mands will be lost and will have to be learned all over again, so

don’t discard your other remote controllers.

■ Deleting Learning Commands

1. While holding down REMOTE MODE for the mode

in which you want to delete the command, press and

hold down TV 9 until REMOTE MODE button

lights (about 3 seconds).

2. Press REMOTE MODE or the button from which you

want to delete the commands.

REMOTE MODE button flashes twice.

When you press REMOTE MODE, all commands

learned in that remote mode will be deleted.

You can program the remote controller’s ACTIVITIES to

perform a sequence of remote control actions.

Example:

To play a CD you typically need to perform the following

actions:

1. Press RECEIVER to select the Receiver remote con-

troller mode.

2. Press ON to turn on the AV receiver.

3. Press TV/CD to select the TV/CD input source.

4. Press 1 to start playback on the CD player.

You can program ACTIVITIES so that all four actions are

performed with just one button press.

Making Macros

Each ACTIVITIES can store one macro, and each macro

can contain up to 32 commands.

Note

• Once you have taught a new macro commands, the original

macro will no longer work. If you retrieve it, you will have to

taught again.

Running Macros

Deleting Macros

Using Normal Macros

RECEIVER

MY MOVIE,

MY TV,

MY MUSIC

ALL OFF

While holding down RECEIVER, press and hold

down MY MOVIE, MY TV, or MY MUSIC until

MY MOVIE, MY TV, or MY MUSIC lights (about

3 seconds).

Press the buttons whose actions you want to pro-

gram into the macro in the order you want them

performed.

For the CD example above, you’d press the following

buttons: ON, TV/CD, 1.

Note

• MODE is invalid at macro making operation.

When you’ve finished, press ACTIVITIES again.

ACTIVITIES button flashes twice.

If you enter 32 commands, the process will finish

automatically.

Press MY MOVIE, MY TV, or MY MUSIC.

The commands in the macro are transmitted in the

order in which they were programmed. Keep the

remote controller pointed at the AV receiver until all

of the commands have been transmitted.

Macros can be run at any time, regardless of the cur-

rent remote controller mode.

While holding down HOME, press and hold down

ALL OFF until ALL OFF lights (about 3 seconds).

Press ALL OFF again.

ALL OFF flashes twice.

Note

• It changes into Easy macro mode when the macro is

deleted (➔ 27).

• When you using Normal macro mode, you cannot use the

easy macro command including the change of the source

component.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR808 in the language / languages: English as an attachment in your email.

The manual is 4,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR808

Onkyo TX-NR808 User Manual - German - 196 pages

Onkyo TX-NR808 User Manual - Dutch - 196 pages

Onkyo TX-NR808 User Manual - French - 200 pages

Onkyo TX-NR808 User Manual - Italian - 196 pages

Onkyo TX-NR808 User Manual - Swedish - 196 pages

Onkyo TX-NR808 User Manual - Spanish - 200 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Onkyo TX-NR808 Manual

Product: