553771
102
Zoom out
Zoom in
Previous page
1/148
Next page
102
Advanced Setup—Continued
Power Control On: Power Control enabled.
Off: Power Control disabled.
To link the power functions of -compatible components connected via HDMI, select “On”.
This setting is set to “On” automatically when the above “HDMI Control (RIHD)” is set to “On” for the first
time.
Notes:
The
“Power Control” setting can be set only when the above HDMI Control (RIHD) setting is set to “On”.
HDMI power control only works with -compatible components that support it and may not work
properly with some components due to their settings or compatibility.
When set to “On”, the power consumption on standby mode increases.
When set to “On”, regardless of whether the AV receiver is On or on Standby, both audio and video received
by an HDMI input will be output by the HDMI OUT for playback on the TV or other component that’s
connected to the HDMI OUT.
Refer to the connected component’s instruction manual for details.
TV Control On: TV Control enabled.
Off: TV Control disabled.
Set to “On” when you want to control the AV receiver from an -compatible TV that is connected to
HDMI.
Notes:
Do not assign the component connected with the HDMI input to the TV/TAPE selector when you set “TV
Control” setting to “On”. Otherwise, appropriate CEC (Consumer Electronics Control) operation is not guar-
anteed.
•Set to
Off when the TV is not compatible or when it is unclear whether the TV is compatible or not.
The
“TV Control” setting can be set only when the above HDMI Control (RIHD) and “Power Control”
settings are both set to “On”.
Refer to the connected component’s instruction manual for details.
Network
See “Network Settings” on page 113.
Firmware Update
Notes:
Perform the firmware update only when an announcement is posted on the Onkyo Web site.
It takes about 40 minutes to complete the firmware update.
Version
The current version of the firmware is displayed. The version is made up of the versions of the AV receiver and
Onkyo dock (if connected).
Receiver via NET
You can update the AV receiver’s firmware. Check the network connection before update.
Do not shutdown the power of the AV receiver while update.
Universal Port via NET
You can update the Onkyo dock’s firmware. Check the network connection before update. Do not shutdown the
power of the AV receiver while update.
Note:
This update shall not be performed when no dock is connected to UNIVERSAL PORT jack.
Note:
After changing the settings of the HDMI Control (RIHD), “Power Control”, or “TV Control”, set all con-
nected pieces of equipment to Standby and then turn them on again. Refer to the User’s Manuals for all
connected pieces of equipment.
TX-NR807_En.book Page 102 Tuesday, July 28, 2009 12:00 PM
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR807 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR807 in the language / languages: English as an attachment in your email.

The manual is 17,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR807

Onkyo TX-NR807 User Manual - German - 288 pages

Onkyo TX-NR807 User Manual - Dutch - 288 pages

Onkyo TX-NR807 User Manual - French - 296 pages

Onkyo TX-NR807 User Manual - Italian - 288 pages

Onkyo TX-NR807 User Manual - Swedish - 288 pages

Onkyo TX-NR807 User Manual - Spanish - 296 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info