553769
58
Zoom out
Zoom in
Previous page
1/97
Next page
58
Audio Adjust (Advanced)—Continued
a. A/V Sync
If a digital signal processor is connected, there may be
times when the audio and video from a DVD or LD
player is not output in perfect sync. The result is where
the sound and picture do not match and the sound is
heard too early. In such a case, use this setting to prop-
erly synchronize the audio and video. This setting can be
set between 0 and 74.0 ms in 0.5 ms increments. Under
normal circumstances, this can left at 0 ms. If the delay
time is set between 24.5 and 74.0 ms, and upsampling is
used, the delay will be fixed at 24.0 ms. Note that a
change in the setting will not be displayed.
Relative Delay
b. Center, c. Surr L/R, d. Surr Back
Besides level and delay adjustments, this setting provides
the ability to change or adjust the relative speaker position
to fine tune the soundfield for the listener. This is accom-
plished using Onkyo’s unique Enhanced Spatial Position-
ing Algorithm. This adjustment provides 10 milliseconds
of delay for the speakers, which is equivalent to moving
the speaker 10 feet (3 meters) away. This adjustment is set
up to provide –4.0 or +6.0 milliseconds (–4 or +6 feet/–1.2
or +1.8 meters) of adjustment to the listener’s position.
Once the coarse adjustments (i.e., speaker level and distance
adjustments) are made, the system is set up to provide a typ-
ical or broad surround environment. By adjusting the relative
position of the speakers, we are able to alter the soundfield to
be more spread out (deeper) or focused (shallower).
Note:
Surr Back cannot be selected if the Surr Back/Zone 2
setting in the Surr Back/Zone 2 Sub-menu of the Hard-
ware Setup Menu is set to “Zone 2.
This sub-menu is for setting the LFE (Low Frequency
Effect) levels included in Dolby Digital and DTS software.
a. Dolby Digital
The level can be adjusted to either – or between –10 and
0 decibels in 1 decibel increments. For Dolby Digital input
source signals, the LFE level set here is used. A setting of
0 decibels is recommended for optimum performance;
however, if the source is recorded with the low frequency
range too strong, lower this setting as necessary.
b. DTS
The level can be adjusted to either – or between –10
and 0 decibels in 1-decibel increments. For DTS input
source signals, the LFE level set here is used. A setting
of 0 decibels is recommended for optimum performance;
however, if the source is recorded with the low frequency
range too strong, lower this setting as necessary.
Mono Sub-menu
The settings of this sub-menu shown below are enabled
when the listening mode is set to “Mono.
a. Academy Filter
Older monaural film mixes relied on high-frequency
rolloff in presentation to sound properly balanced, so
that excessive hiss from the grain structure of the film
would not be heard. The high-frequency loss was typi-
cally due to a combination of optical slit loss, electrical
filters, loudspeaker response, and screen loss. Some
films have been transferred to video without such a high-
frequency rolloff, and thus sound overly bright and hissy.
The TX-NR801/TX-NR801E includes this “Academy
Filter,” which is based on contemporary playback prac-
tices for such films over wide-range systems.
This can be set to either “On” or “Off.
b. Input Channel
This allows you to set which input channel to use for
monaural sound.
Auto L+R: Select this under normal circumstances. When
the input source is center channel, this center channel is
used as the monaural sound input channel. Otherwise, the
left and right channels are mixed and the mixed signal is
used as the monaural sound input channel.
Left/Right: You will need to select either left or right
when playing a video source that contains bilingual data.
In such a case, the left and right channels will contain the
audio for different languages. Select the channel with the
language you desire.
Setting the Low Frequency Effect
Levels (LFE Level)
3-4.Delay
a.A/V Sync : 0.0ms
Relative Delay
b.Center : 0.0ms
c.Surr L/R : 0.0ms
d.Surr Back : 0.0ms
Quit:[SETUP]
3-5.LFE Level Setup
a.Dolby Digital: 0dB
b.DTS : 0dB
Quit:[SETUP]
Detailed Settings for Each Listening
Mode
3-6.Mono Setup
a.Academy Filter:Off
b.Input Channel
:AutoL+R
Quit:[SETUP]
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR801 in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info