553769
53
Zoom out
Zoom in
Previous page
1/97
Next page
53
Input Setup (Basic)—Continued
This sub-menu allows you to adjust for the volume dif-
ferences between your various input source components.
When switching input sources, you may find that the
output level for different components or input sources
connected to the TX-NR801/TX-NR801E is different
even though the main volume setting is the same. Under
normal circumstances, you would then have to change
the volume setting each time you change the input
source. This Intelli Volume setting allows you to preset a
volume level for each input source separately so that
when you do switch from one input source to another,
the TX-NR801/TX-NR801E adjusts the volume accord-
ingly and the volume stays the same.
7
Use the / / / buttons to
move the cursor to the desired
character and then press the
ENTER button.
The characters entered will appear in
order in the 10-character space field
above.
Note:
If you are using the front display and not
the OSD Menu, press the button when
“Char: ” appears in the front display.
Then “ABCDEF..” appears. This is the
Character Input screen. The cursor but-
tons will allow you to navigate through
this screen just as they would if you were
using the OSD Menu so you will need to
refer to the figure below for the actual
layout of the Character Input screen.
At the Character Input screen, press the
cursor buttons to move the cursor to the
desired character and then press the
ENTER button. The characters entered
will appear in order in the 10-character
space field above. After two seconds, the
Character Input screen appears again.
To change an existing character,
move the cursor backward with the
RETURN button or forward with the
ENTER button to the location of the mis-
taken character and then enter the desired
character as explained above.
To erase a character,
enter a blank space in its place.
2-4.Character Input
a.Character Display
:No
b.Character
:
Press to edit.
to clear.
Quit:[SETUP]
Input:DVD
2-4.Character Input
b.Character
:
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
[ENTER] 0123456789-.’
()+*/=,:;!?_
Back:
[RETURN]
Input:DVD
8
After you have completed the
name, press the ENTER button
until you return to the Character
Input Sub-menu.
Once 10 characters are entered, you will
automatically return to the previous
screen. If the name is completed before
you enter 10 characters, enter spaces
until 10 characters are entered.
Adjusting the Volume Differences
Between Components (IntelliVolume)
1-3
Use the same procedures as the
ones for the Character Input
sub-menu to display the Input
Setup sub-menu.
4
Use the and cursor buttons to
select IntelliVolume and then
press the ENTER button.
The “IntelliVolume” menu appears.
5
Use the and cursor buttons
to set the desired value.
If the volume is quieter than other
sources, increase its decibel level with
the cursor button, or if it is louder
than other sources, decrease its decibel
level with the cursor button.
The Intelli Volume can be adjusted
between –12 and +12 decibels.
6
Press the SETUP button to return
to the main menu.
2-5.IntelliVolume Setup
a.IntelliVolume
: 0dB
Quit:[SETUP]
Input:DVD
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR801 in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info