553769
13
Zoom out
Zoom in
Previous page
1/97
Next page
13
Index Parts and Facilities—Continued
1 SEND/LEARN indicator [7]
Lights red when signals are sent by the remote con-
troller. It also flashes when a button is pressed and
the battery power is low.
2 ON/STANDBY button [27, 68]
ON: Press to turn on the TX-NR801/TX-NR801E.
STANDBY: Press to place the TX-NR801/
TX-NR801E in the standby state.
Be aware that pressing the STANDBY button only
places the TX-NR801/TX-NR801E in standby and
does not turn the power off completely.
3 SLEEP button [40]
Press to set the sleep function.
The SLEEP button enables you to set the
TX-NR801/TX-NR801E to turn off automatically
after a specified time period.
4 MACRO 1, 2 button [86, 88, 89]
Press to program or execute the macro function.
5 MODE buttons and indicators [80-88]
Press to select the component to be operated by the
remote controller. When a MODE button is pressed,
it will light for 8 seconds. The selected MODE but-
ton will also light whenever any other operation but-
ton is pressed.
6 RETURN button [29]
Press to enter the selected setting and return to the
previous menu.
7 CH button [46]
Press to select a preset channel for the tuner.
8 CH SEL button [35, 40, 65]
Press to select a speaker channel when adjusting the
speaker level.
9 AUDIO SEL button [41, 65]
Press to select the audio input signal.
0 LEVEL / buttons [35, 40, 65]
Press to adjust the volume of the speaker selected
using the CH SEL button.
A Operation buttons [80-81, 85]
Press to operate other devices connected to the
TX-NR801/TX-NR801E.
B INPUT SELECTOR buttons [36, 39, 44, 52, 56,
65, 68]
Press to select an input source.
Same as the input selector buttons on the front panel
of the TX-NR801/TX-NR801E. The input source
for each button is given here. DVD:DVD, CD:CD,
V1:VIDEO1, V2:VIDEO2, V3:VIDEO3,
V4:VIDEO4, V5:VIDEO5, TAP:TAPE, TUN:FM/
AM, PH:PHONO.
C Listening mode buttons [44, 65]
Press to select a listening mode.
D Re-EQ button [55, 61]
Depending on the listening mode, you can turn the
Re-EQ function on or off.
E DISPLAY button [41]
For changing the front display.
F DIMMER button [40]
Adjusts the display brightness.
There are three settings available: normal, dark, and
very dark.
G LIGHT button
Press to turn on and off the lights in the buttons of
the remote controller.
H SETUP button [29]
Press to display the Setup Menu on the TV screen
and in the display. Press again to exit the menu.
I ///, ENTER button [29]
When in the Setup Menu, press the upper and lower
arrow buttons to select an item, press the right and
left arrow buttons to select parameter values or
modes, and press the ENTER button to advance to
the next item.
J VOL button [39, 65]
Press to adjust the volume.
K TEST button [35]
This button is used to set the speaker output levels.
Use this button in conjunction with the LEVEL /
and CH SEL buttons to calibrate the speaker lev-
els without entering the Setup Menu.
L MUTING button [39]
Press to activate the mute function.
M ZONE 2 button [68]
Press to perform operations in the remote zone.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR801 in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info