549874
14
Zoom out
Zoom in
Previous page
1/20
Next page
14
Step 3:
Playing Back
6
Using the ZONE function
You can connect the unit with a pre-main amplifier or
speakers in a separate room and playback audio sources
from an external device connected to the analog audio input
jacks of the unit. And also, you can enjoy sources of "NET",
"USB", "BLUETOOTH" as well as AM/FM broadcasting.
It is also possible to play the sound from different analog
connected devices in the main room and separate room.
•
As for the "NET", "USB" and "BLUETOOTH", you cannot
select different inputs for the main room and separate
room. For example, if "NET" has been selected in the
main room and then "USB" is selected as playback
source in the separate room, the input in the main room
will change to "USB" accordingly.
•
When listening to AM/FM broadcasting, you cannot select
different stations for the main room and separate room.
Therefore broadcasting of the same station will be heard
in the both rooms.
Connecting with Player
To output audio of the Blu-ray Disc player or such other
player as the source of Zone playback, it is necessary to
connect the RCA audio output jacks of the player and the
analog audio input jacks of the unit using the analog audio
cable.
AUDIO
OUT
•
Output to Zone is not possible if the connection is only
with HDMI cable or digital cable.
•
Analog audio output setting may be necessary on the player.
Making ZONE connection
Connecting an amplifier or receiver in another room
You can enjoy 2-channel stereo playback in the other room
during playing 7.1-channel in the main room.
Connect the ZONE2 LINE OUT jacks or ZONE3 LINE
OUT jacks of the unit and the line-in jacks of the pre-main
amplifier in a separate room with an analog audio (RCA)
cable.
Zone 2 Zone 3
• The volume should be adjusted with the pre-main
amplifier used in the separate room.
Connecting speakers in another room
It is possible to directly connect the speakers in another
room without an amplifier. Connect the speakers in another
room to the ZONE2 speaker terminals of the unit using
speaker cables. In this case, 5.1 ch will be the maximum in
the main room when the Zone function is on.
Change the setting: After connecting the speakers,
press RCV and then HOME on the remote controller, select
"Setup" - "2.Speaker Setup" - "Speaker Settings" and set
"Powered Zone2" to "Yes", and press ENTER on the remote
controller.
Zone 2
•
Adjust the volume on this unit. To adjust the volume,
press ZONE2 on the remote controller and adjust with
VOL
/
. You can mute the sound by pressing MUTING.
Performing ZONE playback
1.
Press ZONE2 or ZONE3 on the remote controller,
point the remote controller at the remote controller
sensor and press
z
RECEIVER.
"Z2" or "Z3" lights on the main unit display and the ZONE
function is enabled. (ZONE 2 or ZONE 3 is now on.)
2.
Press ZONE2 or ZONE3 on the remote controller
again and press INPUT SELECTOR of the input to be
played in a separate room.
To play the same source in the main room and separate
room, hold down ZONE2 or ZONE3 for approximately 3
seconds.
¼
To control on the main unit, press ZONE2 or ZONE3 and within 8
seconds, press the input selector button of the input to be played in a
separate room. To play the same source in the main room and separate
room, press ZONE2 or ZONE3 twice.
To turn off the ZONE function: Press ZONE2 (or ZONE3)
on the remote controller and press
z
RECEIVER. To control
on the main unit, press ZONE2 (or ZONE3) and within 8
seconds, press
z
ON/STANDBY.
•
Zone playback is not possible if the player and the unit
are connected via HDMI cable or digital cable. Connect
the player to the analog audio input jacks of the unit with
analog audio cable. Analog audio output setting may be
necessary on the player.
•
If ZONE 2 or ZONE 3 is on, power consumption during
standby becomes larger than normal.
•
If ZONE 2 or ZONE 3 is turned on when the listening
mode of the main room is Pure Audio, it will automatically
switch to Direct. (European, Australian and Asian models)
• While ZONE 2 or ZONE 3 is on, the RI linked system
function (interlink between Onkyo components) is
disabled.
• This unit is equipped with WHOLE HOUSE MODE
function which the same source is played back instantly
in all rooms if you press ZONE2 and ZONE3 buttons
simultaneously during playing in the main room.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR737 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR737 in the language / languages: English as an attachment in your email.

The manual is 5,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR737

Onkyo TX-NR737 User Manual - English - 93 pages

Onkyo TX-NR737 User Manual - German - 100 pages

Onkyo TX-NR737 User Manual - French - 40 pages

Onkyo TX-NR737 User Manual - Italian - 100 pages

Onkyo TX-NR737 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info