549874
4
Zoom out
Zoom in
Previous page
1/20
Next page
4
Step 1:
Connections
the section 2 "2nd Step : Source Connection" of "Step 2:
Setting Up".
• To enjoy HDCP2.2 protected video, connect the player to
the IN3 jack and the TV to the HDMI OUT MAIN jack of
the unit. Your player and TV need to support HDCP2.2.
• To play 4K or 1080p video, use the high speed HDMI
cable.
• Another TV can be connected to the HDMI OUT SUB
jack. To use the function to display the unit's setting
screen on the TV, connect the TV to the HDMI OUT
MAIN jack.
• It is possible to send video and audio of an MHL-enabled
mobile device by connecting the MHL-enabled mobile
device to the AUX INPUT HDMI/MHL jacks on the front
panel.
Connecting Components without HDMI
If your AV component does not have HDMI jack, use an
available jack of your component for cable connection with
this unit. Just as the HDMI jacks, other jacks on this unit
have a preassigned input selector button on the front panel.
See the name of the input selector button shown with the
jack when connecting the device.
Audio signal connection
1
Digital connection: Use a digital optical cable
(OPTICAL) or digital coaxial cable (COAXIAL) for
connection.
Digital optical cable (OPTICAL)
As the digital in optical jack of the unit has a cover,
push in the cable against the cover as it is turned
inside.
Digital coaxial cable (COAXIAL)
2
Analog connection: Use an analog audio cable for
connection with a player.
To output audio of the Blu-ray Disc player or such other
player as the source of Zone playback, you need to
make analog connection using the analog audio cable
between the corresponding jacks of the player and this
unit. For details on the Zone function, see the section 6
"Using the ZONE function" of "Step 3: Playing Back".
Analog audio (RCA) cable
3
Connection with turntable: If it uses an MM type
cartridge and does not have a built-in audio equalizer,
connect it to the
3
PHONO jack. If the connected
turntable has a built-in audio equalizer, connect it to the
2
TV/CD jack.
¼
If it uses an MC type cartridge, install an audio equalizer compatible
with MC type cartridge between the unit and the turntable by
connecting it to the
2
TV/CD jack. For details, refer to the turntable's
instruction manual.
¼
If the turntable has a ground wire, connect it to the GND terminal of this
unit. If connecting the ground wire increases noise, disconnect it.
Video signal connection
The unit has a video upconversion function. For details, see
the section on the right.
4
Use a component video cable to connect a TV
with component video input jacks and a player with
component video output jacks.
Component video cable
Its transmitted video has higher quality than that of
composite video cable.
5
Use a composite video cable to connect a TV with
composite video input jack or a player with composite
video output jack.
Composite video cable
1
3
4 5
2
Video signals input to the composite video input
jack or the COMPONENT VIDEO input jacks will be
upconverted to HDMI signals and then output from
the HDMI output jack.
AV Receiver
¼
When the video signals input to the COMPONENT VIDEO
jacks are upconverted and output from the HDMI output
jack, their resolution will be fixed to 480i. Set the output
resolution of the player to 480i/576i. If the input has 480p
or higher resolution, a message prompting you to change
the resolution setting will appear. If your player does not
support 480i/576i output, use the composite video jack.
¼
If multiple video signal inputs are put into one input
system, the output will be made in the order of HDMI,
component video, and composite video. Note that it is not
possible to convert digital audio input signals to analog or
vice versa.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR737 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR737 in the language / languages: English as an attachment in your email.

The manual is 5,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR737

Onkyo TX-NR737 User Manual - English - 93 pages

Onkyo TX-NR737 User Manual - German - 100 pages

Onkyo TX-NR737 User Manual - French - 40 pages

Onkyo TX-NR737 User Manual - Italian - 100 pages

Onkyo TX-NR737 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info