686241
121
Zoom out
Zoom in
Previous page
1/135
Next page
121
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
Troubleshooting
Power
Cannot turn on the unit
Make sure that the power cord is properly plugged into the wall outlet.
Unplug the power cord from the outlet once, wait 5 seconds or more, then plug it in again.
( p40)
The unit turns o unexpectedly
If “5. Hardware” - “Power Management” - “Auto Standby” on the Setup menu is activated, the unit automatically enters the standby mode.
The protection circuit function may have operated. In such a case, if the power is turned on again, “AMP Diag Mode” is displayed on the main
unit’s display, and the unit enters the diagnosis mode to check the unit for abnormality. As the result, if no problem is found, “AMP Diag Mode”
on the display disappears. Then, you can use the unit normally. If “CHECK SP WIRE” appears on the display, the speaker cables may be short-
circuited. Check if the core wire of a speaker cable is not in contact with the core wire of another speaker cable or the rear panel, and turn the
power on again If “NG” is displayed, remove the power plug from the outlet immediately, and consult the dealer.
The protection circuit function may have operated due to an abnormal rise in temperature of the unit. In such a case, the power turns o
repeatedly even if the power is turned on each time. Secure sucient ventilation space around the unit, wait for a while until the temperature of
the unit decreases. Then, turn the power on again.
WARNING: If smoke, smell or abnormal noise is produced by the unit, unplug the power cord from the outlet immediately, and contact the dealer or
Onkyo Support.
( p105)
Audio
Make sure that the speaker setup microphone is no longer connected.
Conrm that the connection between the output jack on the connected device and the input jack on this unit is correct.
Make sure that none of the connecting cables are bent, twisted, or damaged.
If the MUTE indicator on the display blinks, press on the remote controller to cancel muting.
While headphones are connected to the PHONES jack, no sound is output from the speakers.
When "Source" - "Audio Select" - "PCM Fixed Mode" in the Setup menu is set to "On", no sound is played if signals other than PCM are input.
Change the setting to O.
Check the following if the problem persists after you have conrmed the above.
No sound from the TV
Change the input selector on this unit to the position of the terminal to which the TV is connected.
If the TV does not support the ARC function, along with the connection by an HDMI cable, connect the TV with this unit using a digital optical
cable, digital coaxial cable, or analog audio cable.
( p32)
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR686 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR686 in the language / languages: English as an attachment in your email.

The manual is 8,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR686

Onkyo TX-NR686 User Manual - German - 135 pages

Onkyo TX-NR686 User Manual - Dutch - 135 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info