686241
109
Zoom out
Zoom in
Previous page
1/135
Next page
109
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
AccuEQ
AccuEQ Room Calibration: Enable or disable the equalizer function that
corrects for sound distortion caused by the acoustic environment of the room.
To enable this setting, normally select "On (All Ch)", and to disable only the front
speakers, select "On (ex. L/R)". The setting can be set for each input.
Equalizer: Select "Preset 1" to "Preset 3" congured in "2. Speaker" - "Equalizer
Settings" in the Setup menu. When this is set to “O”, the same sound eld
setting is applied to all ranges.
Re-EQ, Re-EQ(THX): Adjusts the soundtrack with the enhanced high range so
that it suits a home theater.
In Re-EQ, the following listening modes can be used: Dolby Audio - DD, Dolby
Audio - DD+, Dolby Audio - DSur, Dolby Audio - TrueHD, Multichannel, DTS,
DTS-ES, DTS 96/24, DTS-HD High Resolution Audio, DTS-HD Master Audio,
DTS Neural:X, DTS Express and DSD.
In Re-EQ(THX), the following listening modes can be used:
THX Cinema and THX Select Cinema.
It cannot be set if the listening mode is Pure Audio (European, Australian and
Asian models) or Direct.
Other
A/V Sync: If the video is behind the audio, you can delay the audio to oset the
gap. The setting can be set for each input.
It cannot be set if the listening mode is Pure Audio (European, Australian and
Asian models) or Direct.
Music Optimizer: Improve the quality of the compressed audio. Playback sound
of lossy compressed les such as MP3 will be improved. The setting can be set
for each input. This works in signals whose sampling frequencies are 48 kHz or
less. The setting is not eective in the bitstream signals.
It cannot be set if the listening mode is Pure Audio (European, Australian and
Asian models) or Direct.
Late Night: Enable small sounds to be easily heard in detail. It is useful when
you need to reduce the volume while watching a movie late night. You can enjoy
the eect only when playing the Dolby series and DTS series input signals.
This function cannot be used in the following cases.
When playing Dolby Digital Plus or Dolby TrueHD with "Loudness
Management" set to "O"
When the input signal is DTS:X, and "Dialog Control” is not 0 dB
Center Spread: Adjust the width of the sound eld of the front channel when
playing in the Dolby Audio - DSur listening mode. To spread the width of the
sound eld to the right and left, set to "On". To concentrate the sound in the
center, set to "O".
Depending on the speaker settings, "O” is applied.
Dialog Control: You can increase the volume of dialog portion of the audio up to
6 dB by 1 dB step so that you can hear the dialog easily in noisy atmosphere.
This cannot be set for content other than DTS:X.
Depending on the content, this function may not be selected.
HDMI Out: Select the HDMI OUT jack to output video signals from "MAIN",
"SUB", and "MAIN+SUB".
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR686 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR686 in the language / languages: English as an attachment in your email.

The manual is 8,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR686

Onkyo TX-NR686 User Manual - German - 135 pages

Onkyo TX-NR686 User Manual - Dutch - 135 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info