548135
25
Zoom out
Zoom in
Previous page
1/89
Next page
Advanced Settings
25
Setting item Default Value Setting Details
Back 100Hz Select the frequency to start outputting bass
frequencies (crossover frequency) for each
channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
• In the following cases, this setting will be set to
"None":
"Surround" is set to "None".
"Front Speakers Type" is set to "Bi-Amp".
"Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
• This setting cannot be set to "Full Band" unless
"Surround" is set to "Full Band".
Height None Select the frequency to start outputting bass
frequencies (crossover frequency) for each
channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
• In the following cases, this setting will be set to
"None":
"Surround" is set to "None".
"Front Speakers Type" is set to "Bi-Amp".
"Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
• This setting cannot be set to "Full Band" unless
"Front" is set to "Full Band".
Back ch 2ch Select the number of channels of the connected
surround back speaker.
"1ch": When one speaker is connected (Connect to
the BACK or HEIGHT L terminal)
"2ch": When two speakers are connected
• The setting cannot be changed if "Surround" or
"Back" is set to "None".
LPF of LFE 120Hz Set the low-pass filter for LFE (low-frequency
effect) signals in order to pass lower frequency
signals than the set value and thus cancel
unwanted noises. The low-pass filter will be
effective only on sources with LFE channel.
Set a frequency from "80Hz", "90Hz", "100Hz" and
"120Hz".
"Off": Do not use this function
Setting item Default Value Setting Details
Double Bass ----- Boost bass output by feeding bass sounds from
the front left and right, and center speakers to the
subwoofer.
"On": Bass output will be boosted.
"Off": Bass output will not be boosted.
• The setting will not automatically be configured
even if you performed the automatic speaker
setup.
• If "Subwoofer" is set to "No" or if "Front" is set to
other than "Full Band", the setting will be fixed
to "-----".
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR636 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR636 in the language / languages: English as an attachment in your email.

The manual is 16,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR636

Onkyo TX-NR636 User Manual - English - 20 pages

Onkyo TX-NR636 User Manual - German, Dutch - 100 pages

Onkyo TX-NR636 User Manual - French - 40 pages

Onkyo TX-NR636 User Manual - Italian, Swedish - 100 pages

Onkyo TX-NR636 User Manual - Spanish - 40 pages

Onkyo TX-NR636 User Manual - Finnish - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info