548134
16
Zoom out
Zoom in
Previous page
1/20
Next page
16
Troubleshooting
The AV receiver turns off unexpectedly.
• The AV receiver will automatically enter standby mode
when Auto Standby is set and launched.
There’s no sound, or it’s very quiet.
• A wrong input selector button has been selected. Select
a correct input for the player. Also check that muting is
not on.
• Not all listening modes use all speakers.
There’s no picture.
• A wrong input selector button has been selected.
• There will be no video output, if the listening mode is
Pure Audio. (European, Australian and Asian models)
• To display video from the connected player on the TV
screen while the unit is in standby, you need to enable
"HDMI Through".
• When the TV image is blurry or unclear, power code or
connection cables of the unit may have interfered. In
that case, keep distance between TV antenna cable and
cables of the unit.
HDMI control does not function correctly.
• Set the HDMI CEC (RIHD) setting of the unit to "On". It is
also necessary to make the HDMI linked system setting
on the TV. See the TV's instruction manual for details.
The remote controller does not work.
• Be sure to press RCV first before operating the unit with
the remote controller.
Cannot access to network.
• Try plugging/unplugging the unit or the wireless LAN
router or check their power-on status. This will work well
in many cases.
• If the desired wireless LAN router is not in the access
point list, it may be set to hide SSID or the ANY
connection may be off. Change the setting and try again.
• Place the AV receiver away from the devices emitting
electromagnetic waves on the 2.4 GHz band (microwave
ovens, game consoles, etc.). If this does not solve
the problem, stop using other devices which emit
electromagnetic waves.
• When other wireless LAN devices are used near the AV
receiver, several issues such as interrupted playback
and communication may occur. You can avoid these
issues by changing the channel of your Wi-Fi router. For
instructions on changing channels, see the instruction
manual provided with your Wi-Fi router.
• If there is a metallic object near the AV receiver, wireless
LAN connection may not be possible as the metal can
effect on the radio wave.
• If there is more than one access point in the network,
separate each access point.
Bluetooth
• Try plugging/unplugging the unit and the Bluetooth-
enabled player. After that, check that the Bluetooth
function is enabled on the Bluetooth-enabled device and
the connection with the unit has been established.
Before requesting a service
If the methods listed above cannot solve your problem, try
plugging/unplugging the power cord and connection cables
of the unit and/or reset the unit status. If you reset the unit
status, your preferences will be reset to the defaults. Note
them down before starting reset.
How to reset: Perform steps 1 and 2 below. "Clear" will
appear on the display and the unit returns to standby.
1.
Hold down CBL/SAT,
2.
Press
z
ON/STANDBY.
Clear
How to initialize the remote controller: To initialize the
remote controller to its factory defaults, while holding down
RCV, press and hold HOME until the remote indicator lights
(about 3 seconds). Within 30 seconds, press RCV again.
RCV
Remote
indicator
HOME
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR535 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR535 in the language / languages: English as an attachment in your email.

The manual is 4,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR535

Onkyo TX-NR535 User Manual - English - 76 pages

Onkyo TX-NR535 User Manual - German, Dutch - 92 pages

Onkyo TX-NR535 User Manual - French - 40 pages

Onkyo TX-NR535 User Manual - Italian, Swedish - 92 pages

Onkyo TX-NR535 User Manual - Spanish - 40 pages

Onkyo TX-NR535 User Manual - Finnish - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info