527525
68
Zoom out
Zoom in
Previous page
1/120
Next page
Appendix
En-68
Operating
procedure
( page 44)
Firmware Update
To update the firmware of the AV receiver, you can
choose from the following two methods: update via
network, or update via USB storage. Choose the one
that best suits your environment. Before proceeding
with the update, please read the corresponding
explanations carefully.
Update via network
You need a wired Internet connection to update the
firmware.
Update via USB storage ( page 69)
Please prepare a USB storage device such as a
USB flash memory stick. You need at least 32 MB
of available space to update the firmware.
Note
Check the network connection before updating.
Do not touch any cable or device connected to the AV
receiver during the update process.
Do not attempt to access the AV receiver from your PC
while it is being updated.
Do not shutdown the power of the AV receiver while it is
being updated.
The storage media in the USB card reader may not work.
If the USB device is partitioned, each section will be treated
as an independent device.
If the USB device contains a lot of data, the AV receiver
may take a while to read it.
Operation is not guaranteed for all USB devices, which
includes the ability to power them.
Onkyo takes no responsibility whatsoever for the loss or
damage of data resulting from the use of a USB device with
the AV receiver. Onkyo recommends that you back up your
important music files beforehand.
If you connect a USB hard disk drive to the USB port,
Onkyo recommends that you use its AC adapter to power it.
USB hubs and USB devices with hub functions are not
supported. Do not connect your USB device via a USB hub.
USB devices with security functions are not supported.
See the Onkyo web site for latest information.
The AV receiver allows you to update the firmware using
network connection on the rear panel.
Note
Make sure your AV receiver and TV are turned on and an
Ethernet cable is connected to the rear panel of the AV
receiver.
Never unplug or turn off the AV receiver while it is being
updated.
Never plug or unplug an HDMI or Ethernet cable during the
update process.
Do not attempt to access the AV receiver from your PC
while it is being updated.
Never unplug the power cord during the update process.
It takes up to 10 minutes to complete the firmware update.
The AV receiver will retain all your settings after the update
is finished.
Before Starting
• Set the “HDMI CEC (RIHD)” setting to “Off
( page 52).
Turn off the controller device connected via network.
• Turn off Multi Zone if this function is present.
• Stop playback of contents from Internet Radio,
iPod/iPhone, USB or servers, etc.
Update Procedure
Limitation of liability
The program and accompanying online
documentation are furnished to you for use at your
own risk. Onkyo will not be liable and you will have
no remedy for damages for any claim of any kind
whatsoever concerning your use of the program or
the accompanying online documentation,
regardless of legal theory, and whether arising in
tort or contract. In no event will Onkyo be liable to
you or any third party for any special, indirect,
incidental, or consequential damages of any kind,
including, but not limited to, compensation,
reimbursement or damages on account of the loss
of present or prospective profits, loss of data, or for
any other reason whatsoever.
Updating the Firmware via Network
1
Press RECEIVER followed by HOME on the
remote controller.
The Home menu appears on the TV screen.
2
Select “F/W Update” and press ENTER.
Note that the “F/W Update” option will be grayed
out for a short while after the AV receiver is
turned on. Please wait until it becomes operable.
3
Select “Update via NET” and press ENTER.
Note that this option will not be available if there
is no firmware file newer than the currently
installed version. If the AV receiver is not
connected to the internet, “Update via NET” is
not displayed.
4
Select “Update” and press ENTER.
The update process will begin.
During the update process, the on-screen display
may disappear depending on the updated
program. When this occurs, you can still view the
update progress on the AV receiver’s display.
The on-screen display will reappear after the
update is complete, and upon turning the AV
receiver off and on again.
5
The message “Completed!” appears on the AV
receiver’s display, indicating that the update
has been completed.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR525 in the language / languages: English as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR525

Onkyo TX-NR525 Quick start guide - English - 4 pages

Onkyo TX-NR525 Quick start guide - German - 4 pages

Onkyo TX-NR525 User Manual - German - 124 pages

Onkyo TX-NR525 Quick start guide - Dutch - 4 pages

Onkyo TX-NR525 User Manual - Dutch - 124 pages

Onkyo TX-NR525 Quick start guide - French - 4 pages

Onkyo TX-NR525 User Manual - French - 124 pages

Onkyo TX-NR525 Quick start guide - Italian - 4 pages

Onkyo TX-NR525 User Manual - Italian - 124 pages

Onkyo TX-NR525 User Manual - Swedish - 120 pages

Onkyo TX-NR525 User Manual - Spanish - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info