527525
57
Zoom out
Zoom in
Previous page
1/120
Next page
En-57
Controlling Other Components
Controlling Other
Components
You can use the AV receiver’s remote controller to
control your other AV components, including those
made by other manufacturers. This section explains
how to enter the remote control code for a component
that you want to control: DVD, TV, CD, etc.
The following REMOTE MODE buttons are
preprogrammed with remote control codes for
controlling the components listed. You do not need to
enter a remote control code to control these
components.
For details on controlling these components, see the
indicated pages.
You’ll need to enter a code for each component that
you want to control.
Note
Though the provided remote control codes are correct at
the time of release, they are subject to change.
You can change the configuration of colored buttons,
with which REMOTE MODE buttons are preset.
Tip
To reset the REMOTE MODE buttons to their default
settings, see “Resetting the REMOTE MODE Buttons”
( page 58).
Note
If any other button than the colored buttons is pressed, the
operation will be cancelled.
This operation cannot be done while the AV receiver is in
Receiver mode or when Zone 2 is active.
Preprogrammed Remote Control
Codes
BD/DVD Onkyo Blu-ray Disc player ( page 59)
TV/CD Onkyo CD player ( page 58)
PC Apple TV
Entering Remote Control Codes
1
Look up the appropriate remote control code
in the separate Remote Control Codes list.
The codes are organized by category (e.g., DVD
player, TV, etc.).
2
While holding down the REMOTE MODE
button to which you want to assign a code,
press and hold down DISPLAY (about 3
seconds).
The remote indicator lights.
Note
Remote control codes cannot be entered for
RECEIVER and the multi zone button.
Only TV remote control codes can be entered for TV.
Except for RECEIVER, TV, and the multi zone button,
remote control codes from any category can be
assigned for the REMOTE MODE buttons. However,
these buttons also work as input selector buttons, so
choose a REMOTE MODE button that corresponds
with the input to which you connect your component.
For example, if you connect your CD player to the CD
input, choose TV/CD when entering its remote control
code.
3
Within 30 seconds, use the number buttons to
enter the 5-digit remote control code.
The remote indicator flashes twice.
If the remote control code is not entered
successfully, the remote indicator will flash once
slowly.
Remapping Colored Buttons
1
While holding down the REMOTE MODE
button that you want to program, press and
hold down A (Red) until the remote indicator
lights (about 3 seconds).
You can only change colored buttons for
components whose codes belong to categories
of the Remote Control Codes list (BD/DVD
player, TV, cable set-top box, etc).
2
Within 30 seconds, press the colored buttons
in the order that you want to reassign them.
The button presses are assigned to each button
from left to right. The remote indicator flashes
twice, indicating that the sequence has been
successfully assigned. If the sequence is not
successfully assigned, the remote indicator will
flash once slowly.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR525 in the language / languages: English as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR525

Onkyo TX-NR525 Quick start guide - English - 4 pages

Onkyo TX-NR525 Quick start guide - German - 4 pages

Onkyo TX-NR525 User Manual - German - 124 pages

Onkyo TX-NR525 Quick start guide - Dutch - 4 pages

Onkyo TX-NR525 User Manual - Dutch - 124 pages

Onkyo TX-NR525 Quick start guide - French - 4 pages

Onkyo TX-NR525 User Manual - French - 124 pages

Onkyo TX-NR525 Quick start guide - Italian - 4 pages

Onkyo TX-NR525 User Manual - Italian - 124 pages

Onkyo TX-NR525 User Manual - Swedish - 120 pages

Onkyo TX-NR525 User Manual - Spanish - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info