527525
53
Zoom out
Zoom in
Previous page
1/120
Next page
Advanced Operations
En-53
Operating
procedure
( page 44)
HDMI Through
` Off
` BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD:
Selects the input source for which the HDMI
Through function is enabled.
` Last:
The HDMI Through function is activated on the
input source selected at the time of setting the
AV receiver to standby mode.
When enabling the HDMI Through function,
regardless of whether the AV receiver is on or in
standby, both audio and video streams from an HDMI
input will be output to the TV or other components via
HDMI connection. The HDMI indicator will be dimly-lit
in standby mode. Note that the indicator may not light
under certain conditions ( page 20).
This setting is fixed to “Auto” automatically when the
above “HDMI CEC (RIHD)” setting is set to “On”,
resulting in automatic input source selection.
Note
Only an input source assigned to an HDMI IN via
HDMI Input” setting is enabled ( page 45).
The power consumption in standby mode will increase
during the HDMI Through function; however in the following
cases, the power consumption can be saved:
The TV is in standby mode.
You are watching a TV program.
Refer to the connected component’s instruction manual for
details.
Depending on the connected component, the correct input
source may not be selected with the setting fixed to “Auto”.
This setting is set to “Off” automatically when the “HDMI
CEC (RIHD)” setting is set to “Off”.
Audio TV Out
` Off
` On
This preference determines whether the incoming
audio signal is output from the HDMI output. You may
want to turn this preference on if your TV is
connected to the HDMI output and you want to listen
to the audio from a connected component through
your TV’s speakers. Normally, this should be set to
Off”.
Note
If “On” is selected and the audio can be output from the TV,
the AV receiver will output no sound through its speakers.
In this case, “TV Speaker” appears on the AV receiver’s
display by pressing DISPLAY.
When “HDMI CEC (RIHD)” is set to “On”, this setting is
fixed to “Auto”.
With some TVs and input signals, no sound may be output
even when this setting is set to “On”.
When “Audio TV Out” or
HDMI CEC (RIHD)” is set to On
and you’re listening through your TV’s speakers, turning up
the AV receiver’s volume control will make the sound be
output from the AV receiver’s front left and right speakers.
To stop the AV receiver’s speakers producing sound,
change the settings, change your TV’s settings, or turn
down the AV receiver’s volume.
Listening mode cannot be changed when this setting is set
to “On” and the audio is output from the TV.
This setting is set to “Off” automatically when the “HDMI
CEC (RIHD)” setting is set to “Off”.
Audio Return Ch
` Off
` Auto:
The audio signal from your TV tuner can be sent
to the HDMI OUT of the AV receiver.
The audio return channel (ARC) function allows an
ARC capable TV to send the audio stream to HDMI
OUT of the AV receiver. To use this function, you
must select the TV/CD input selector and your TV
must be ARC capable. The ARC indicator will light
when the audio signal is detected. Default setting:
----
Note
This setting is fixed to “----” when the “HDMI CEC (RIHD)
setting is set to “Off”.
This setting is set to “Auto” automatically when the HDMI
CEC (RIHD)” setting is set to “On” for the first time.
If you set “Audio Return Ch” to “Auto”, the “Audio
Selector” settings of the TV/CD input selector will be
automatically switched to “ARC” ( page 51).
Tip
After changing the settings of the “HDMI CEC (RIHD)”,
HDMI Through” or “Audio Return Ch”, turn off the power
on all connected pieces of equipment and then turn them on
again. Refer to the user’s manuals for all connected pieces
of equipment.
LipSync
` Off
` On
This function allows the AV receiver to automatically
correct any delay between the video and the audio,
based on the data from the connected monitor.
Note
This function works only if your HDMI-compatible TV
supports HDMI Lip Sync.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR525 in the language / languages: English as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR525

Onkyo TX-NR525 Quick start guide - English - 4 pages

Onkyo TX-NR525 Quick start guide - German - 4 pages

Onkyo TX-NR525 User Manual - German - 124 pages

Onkyo TX-NR525 Quick start guide - Dutch - 4 pages

Onkyo TX-NR525 User Manual - Dutch - 124 pages

Onkyo TX-NR525 Quick start guide - French - 4 pages

Onkyo TX-NR525 User Manual - French - 124 pages

Onkyo TX-NR525 Quick start guide - Italian - 4 pages

Onkyo TX-NR525 User Manual - Italian - 124 pages

Onkyo TX-NR525 User Manual - Swedish - 120 pages

Onkyo TX-NR525 User Manual - Spanish - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info