492660
75
Zoom out
Zoom in
Previous page
1/168
Next page
Advanced Operations
En-75
LFE Level
Dolby Digital
*1
, DTS
*2
, Multich PCM, Dolby
TrueHD, DTS-HD Master Audio, DSD
*3
` QdB, –20dB, –10dB, or 0dB
With these settings, you can set the level of the LFE (Low
Frequency Effects) channel individually for each input
sources.
If you find that low-frequency effects are too loud when
using one of these sources, change the setting to –20 dB or
Q dB.
*1
Dolby Digital and Dolby Digital Plus sources
*2
DTS and DTS-HD High Resolution sources
*3
DSD (Super Audio CD) sources
Direct
Analog
Subwoofer
` Off
` On:
Analog audio signals (bass signals) are output.
This setting determines whether or not analog audio signals
(bass signals) are output from front speakers when the Pure
Audio or Direct listening mode is selected.
Note
If the “Subwoofer” setting is set to “No” ( page 67), this
setting cannot be selected.
When Digital Processing Crossover Network is being used, this
setting is not available.
DSD
DAC Direct
` Off
` On:
DSD signals are not processed by the DSP.
This setting determines whether or not DSD (Super Audio
CD) audio signals are passed through the DSP for A/V
Sync, delay, etc., processing when the Pure Audio or
Direct listening mode is selected.
Note
When Digital Processing Crossover Network is being used, this
setting is not available.
Sound Program Edit
Sound Program
` Stereo Source 1, Stereo Source 2, Stereo Source 3,
Multich Source 1, Multich Source 2, Multich
Source 3
When playing back different content types on the same
source, or when listening to a single content type on
different sources, you can pre-register the settings that best
suit each content in “Sound Program”. The registered
settings can then be called up and modified in one set. Use
Sound Program Edit” to register and modify a
combination of settings.
Tip
To select the registered settings, see “Sound Program
( page 58).
Listening Mode
You can assign a default listening mode that will be
selected automatically when you select the sound program.
The “Last Valid” option means that the listening mode
selected last will be used.
The “Straight Decode” option means that straight
decoding listening mode (Dolby Digital, DTS, etc.) is
selected.
Subwoofer
` No, Yes
You can choose whether or not to use the subwoofer with
the sound program.
Music Optimizer
*1
` Off, On
See “Music Optimizer” ( page 60).
Equalizer
*1
` Off
` Manual:
The manual setting in “Equalizer Settings”
( page 70) is applied.
Audyssey
*1
` Off, Movie, Music
See “Audyssey” ( page 59).
Dynamic EQ
*1*2
` Off, On
See “Dynamic EQ” ( page 59).
Dynamic Volume
*1*2
` Off, Light, Medium, Heavy
See “Dynamic Volume” ( page 59).
Dolby Volume
*1
` Off, On
See “Dolby Volume” ( page 59).
Note
•“Listening Mode” is only available when the input signal
matches the setting of “Sound Program”.
You cannot select the “Subwoofer” setting if you set it to “No
in “Speaker Configuration”.
•“Music Optimizer” is only available when “Stereo Source 1”,
Stereo Source 2” or “Stereo Source 3” is selected.
When “Audyssey Quick Start” has been used for measurement,
the “Audyssey”setting cannot be selected.
*1
This setting cannot be used when the “Listening Mode
setting is set to “Pure Audio” or Direct”.
*2
To enable this setting, you must first perform the Room
Correction and Speaker Setup.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR5010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR5010 in the language / languages: English as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR5010

Onkyo TX-NR5010 User Manual - German - 168 pages

Onkyo TX-NR5010 User Manual - Dutch - 168 pages

Onkyo TX-NR5010 User Manual - French - 168 pages

Onkyo TX-NR5010 User Manual - Italian - 168 pages

Onkyo TX-NR5010 User Manual - Swedish - 168 pages

Onkyo TX-NR5010 User Manual - Spanish - 168 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info