492660
70
Zoom out
Zoom in
Previous page
1/168
Next page
Advanced Operations
En-70
Equalizer Settings
With the Equalizer settings, you can adjust the tone of
speakers individually with a 7-band equalizer. The volume
of each speaker can be set ( page 69).
The Equalizer settings only apply to Speakers A and
cannot be adjusted while Speakers B is selected.
Manual Equalizer
` On:
You can adjust the equalizer for each speaker
manually. Continue with the following procedure:
` Off
:
Tone off, response flat.
Note
When the Direct or Pure Audio listening mode is selected, the
equalizer settings have no effect.
If “Audyssey” is enabled, it prevails over this setting
( page 76).
THX Audio Setup
Surr Back Speaker Spacing
` <1ft (<0.3m)
` 1ft-4ft (0.3m-1.2m)
` >4ft (>1.2m)
You can specify the distance between your surround back
speakers. This setting is used by Speakers A and
Speakers B.
Note
This setting is not available in any of the following cases:
–“Surround Back” is set to “None” ( page 67).
–“Surround Back Ch” is set to 1ch” ( page 68).
–ThePowered Zone 3” setting is set to “Yes” ( page 66)
while Powered Zone 2 is enabled ( page 89).
THX Ultra2/Select2 Subwoofer
` No
` Yes
If you’re using a THX-certified subwoofer, set this setting
to “Yes”.
Note
If the “Subwoofer” setting is set to “No”, this setting cannot be
selected ( page 67).
BGC
` Off
` On
You can apply THX’s Boundary Gain Compensation
(BGC) to compensate the perceived exaggeration of low
frequencies for listeners sitting very close to a room
boundary (i.e., wall).
Note
This setting is only available if “THX Ultra2/Select2
Subwoofer” is set to “Yes”.
If the “Subwoofer” setting is set to “No”, this setting cannot be
selected ( page 67).
Loudness Plus
` Off
` On
When the “Loudness Plus” setting is set to “On”, it is
possible to enjoy even subtle nuances of audio expression
at low volume. This is only available when the THX
listening mode is selected.
Preserve THX Settings
` Yes
` No
If this setting is set to “Yes”, Dynamic EQ, Dynamic
Volume and Dolby Volume have no effect in THX
listening mode.
Note
This setting is fixed at Yes” if “Loudness Plus” is set to On”.
Metadata Compatible
` On:
When Metadata Compatible is set to “On”, valid
metadata is transmitted via the HDMI connections,
and can be used by other devices in the system.
` Off
:
When Metadata Compatible is set to “Off”, metadata
is not transmitted via the HDMI connections.
1
Press w to select “Channel”, and then use e/r to
select a speaker.
2
Use q/w to select a frequency, and then use the e/r
to adjust the level at that frequency.
The volume at each frequency can be adjusted from
–6dB to 0dB
to +6dB in 1 dB steps.
Tip
You can select: “63Hz”, “160Hz”, “400Hz”, “1000Hz”,
2500Hz”, “6300Hz”, or “16000Hz”. And for the
subwoofer, “25Hz”, “40Hz”, “63Hz”, “100Hz”, or
160Hz”.
Low frequencies (e.g., 63 Hz) affect bass sounds; high
frequencies (e.g., 16000 Hz) affect treble sounds.
3
Use q to select “Channel”, and then use e/r to
select another speaker.
Repeat steps 1 and 2 for each speaker.
You cannot select speakers that you set to “No” or
None” in the “Speaker Configuration”
( page 67).
To be continued
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo TX-NR5010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo TX-NR5010 in the language / languages: English as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo TX-NR5010

Onkyo TX-NR5010 User Manual - German - 168 pages

Onkyo TX-NR5010 User Manual - Dutch - 168 pages

Onkyo TX-NR5010 User Manual - French - 168 pages

Onkyo TX-NR5010 User Manual - Italian - 168 pages

Onkyo TX-NR5010 User Manual - Swedish - 168 pages

Onkyo TX-NR5010 User Manual - Spanish - 168 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info